Loading ...
Loading ...
Loading ...
Operating the Self=Cleaning Oven (cont,000 )
How to Set Delay Start of Cleaning
(on some models)
Quick Reminder:
1. Latch the doon
2. Turn the Oven Set knob to CLEAN.
3. Press the START TIME ON/OFF pad.
4. Press the HOUR and MIN. pads to set the
time of day you want cleaning to start_ The
self-clean cycle will automatically begin at the
time you selected.
Delay Start is setting the oven to start the clean
cycle automatically at a latex' time than the present
time of day,
For example= Let's say it is 7:00 and you want the
oven to begin self-cleaning at 9:00 after you'xe finished
in the ldtchen. The oven is just soiled a normal
amount so the normal Clean "Time of 4 hours and
20 minutes is preferre&
1. Follow steps to prepare the oven for cleaning°
2. Slide the latch handle to the
right as far as it will go. __'.._ _.
Never force the latch handle.
Forcing the handle will damage ||_p_
the door lock mechanism.
3. Turn the Oven Set knob to the CLEAN position.
4. Pxess the START 'TIME ON/OFF pad.
5. Press the HOUR pad until 9:00 appears in the
display° The timex' is now set to start cleaning in
2 hours, at 9:00.
The self-clean cycle will be set to automatically
begin at 9:00 and finish at 1:20.
Both the OVEN ON light and the CLEAN light
will flash when the Clean Time is finished.
6. When the CLEAaN light flashes, slide the latch
handle to the left as far as it will go, turn the
Oven Set knob to OFF and open the door,
Never force the latch handle. Wait until the
CLEAN light flashes and the latch slides easily,
Forcing the latch handle may damage the door lock.
Questions and Answers
26
Q. can I use commercial oven cleaners on any part
of my self-deaning oven?
A. No cleaners or coatings should be used around any
part of this oven. If you do use them and do not
thoroughly rinse the oven with water, wiping it
absolutely clean afterwards, the residue can scar the
oven surface and damage metal parts the next time
the oven is automatically cleaned.
Q. What should I do if excessive smoking occurs
during deauin_
A. This is caused by excessive soil, Turn the Oven Set
knob to OFE Open the windows to rid room of
smoke. Wait until the CLEAN light goes off[ Wipe
up the excess soil and reset the clean cycle.
Q. Is the "crackling' or "popping" sound I hear
during cleaning normal?
A, Yes. This is the sound of the metal heating and cooling
during both the cooking and cleaning functions.
Q. Should there be any odor during the deauing?
A. Yes, there will be an odor during the first few
cleanings. Failure to wipe out excessive soil might
also cause a strong odor when cleaning_
Q. Why do I have ash left in my oven after deaning?
A. Some types of soil will leave a deposit which is ash.
It can be removed with a damp sponge or cloth.
Q. If my oven dock is not set to the correct time of
day, can I still serf-dean my oven?
A. If the clock is not set to the correct time of day,
you will not be able to set a delay clean to end at a
specific dme.
Q. What causes the hair-I_e lines on the enameled
surface of my oven?
A. This is a normal condition, resulting from heating
and cooling during cleaning. These lines do not
affect how your oven performs_
Q. Can I cook food on the cooktop while the oven
is seff-deauing?
A, Yes. While the oven is self2cleaning, you can use the
cooktop just as you normally do.
Q. The CLEAN light flashes when I set the clean
cycle. What's wrong?.
A. The CLEAN light will flash until the latch is
moved to the right,
Q. Can I dean the woven gasket around the
oven door?
A, No, this gasket is essential for a good oven seal,
and care must be taken not to rob, damage or move
this gasket.
Loading ...
Loading ...
Loading ...