Loading ...
Loading ...
Loading ...
How to Set the Oven for Cleaning
Quick Reminder:
1. Latch the door.
2. Turn the Oven Set knob to CLEAN_
If the oven is too hot and you start to set a clean cycle,
you will not be able to slide the latch.
Allow additional time for cooling before you try to set
the cycle.
1. Follow directions to prepare the oven for cleaning.
2. Slide the latch handle to the
right as far as it will go.
Never force the latch
handle. Forcing the handle I1|111_
will damage the door lock
mechanism.
3. Turn the Oven Set knob to CLEAN° The CLEAN,
AUTOMATIC OVEN, OVEN ON and COOK
TIME ON/OFF lights will glow.
NOTE: If you turn the Oven Set knob before
you slide the latch, the CLEAN light wilt flash.
Slide the latch to the right.
Clean cycle time is normally 4 hours and
20 minutes. On some models you can change the
Clean Time to anywhere between 3 hours and 5 hours,
and 59 minutes, depending on how dirty your oven is.
You have one minute to change your Clean Time.
Use the HOUR and MIN. pads to change the total
Clean Time.
Both the O'_qENON light and the CLEAN light will
flash when the Clean Time is finished.
After using the dean cycle, the door latch and the
Oven Set knob must be returned to their original
positions before you can use the oven.
When the CLEAN light flashes, slide the latch
handle to the left as far as it will go, turn the
Oven Set knob to OFF and open the door°
Never force the latch handle. Wait until the
CLEAN light flashes and the latch slides easily.
Forcing the latch handle may damage the door lock.
To Stop A Clean Cycle
1. Turn the Oven Set knob to OFE
2. Wait until the oven has cooled below the locking
temperature to unlatch the door. You will not be
able to open the door right away unless the oven has
cooled below the locking temperature.
After a Clean Cycle
You may notice some white ash in the oven. Just
wipe it up with a damp cloth after the oven cools_
If white spots remain, remove them with a soap-filled
steel wool pad. Be sure to rinse thoroughly with a
vinegar and water mixture° These deposits are usually a
salt residue that cannot be removed by the clean cycle°
If the oven is not dean after one dean cycle,
repeat the cycle.
NOTE:
• You cannot set the oven for cooking until the oven is
cool enough for the door to be unlatched.
• While the oven is self-cleaning, you can press the
CLOCK pad to display the time of day. To return
to the clean count down, press the COOK TIME
ONIOFF pad.
(continued next page)
25
Loading ...
Loading ...
Loading ...