Loading ...
Loading ...
Loading ...
Guide to Features (Remote Control)
(A separate holder for the re-
mote control is included. It
incorporates adhesive tape
on the backside. Peel off the
backing and apply the holder
to either side of your PAL
+
.)
1.
POWER: Press briefly to
power the PAL
+
on. The
radio will power on to the last
source used. Press again
to power off. The remote’s
Power button will not turn
the PAL
+
on when the unit is
off and not connected to the
external power supply.
2.
MUTE/SNOOZE: Press to
mute the audio (the icon will
show no volume bars) while the
unit is playing and press again
to restore sound, or adjust the
volume. Press to mute the
alarm after the alarm sounds.
A icon will show on the dis-
play when Snooze is active. The Snooze time is fixed at 7 minutes and is not adjustable.
The Snooze function works when the PAL
+
is connected to the external power supply.
When operating on battery-only power, pressing Snooze will have no effect.
3.
ALARM: Use the pq and Select buttons to adjust and set the alarms. For very
important notes and a complete step-by-step guide, refer to the section titled “How to
set the Alarm”.
4. SLEEP: Press repeatedly to view the amount of time the radio will play before it turns
off automatically and press the Select button to select that time. When the sleep timer
is active you can check the remaining time by pressing the Sleep button on the remote.
A small clock face [ ] will show on the display when the Sleep timer is active. To
cancel Sleep, press the Sleep button until the display shows “Off”. When operating
on battery-only power (external adapter not plugged-in), if Sleep is engaged and the
alarm is set, after Sleep ends, the alarm will not sound. To use both Sleep and Alarm
features, please be sure the external adapter is connected.
5. SOURCE: Press repeatedly to change sources.
6. INFO: Press repeatedly to cycle through the information available depending on the
source mode. This function does not work in Auxiliary mode.
7. PRESETS 1-5: Press and hold to store the currently tuned station. Press briefly to recall
the station associated with that specific preset. In FM mode, the preset number will be
indicated on the display. There are 5 presets for each band.
8. VOLUME
+
/–: Press the Volume
+
button to raise the volume level or the Volume –
button to lower the volume level. If the audio ever sounds distorted, lower the volume
MONO
BAC K
4
2
3
11
8
10
13
9
7
6
1
5
12
14
10 – ENGLISH
Loading ...
Loading ...
Loading ...