Loading ...
FEATURES OF YOUR OPENER
1. Opener Lights: Turn on and off automaticaflywith
4-1/2 minute illumination for your safety and con-
venience Provide constant light when Work Light
control button is pressed
2. Safety System: Independent up and down force
adjustment Door reverses automatically when ob-
structed in DOWN direction Door STOPS when
obstructed in UP direction.
3o Emergency Disconnect: Pull cord disconnect
permits manual door operation,
4_ Automatic Reconnect: Trolley halves reconnect
for automatic operation when opener is energized
after emergency discon nect.
5, Motor Power, 1/2 horsepower permanently lubri-
cated motor with automatic reseL
6. Digital Radio Controls: 19,683 codes from which to
choose Can be changed easily by the owner
7.3-Channel Transmitter: Three push buttons, Each
button can activate one or more remote control
devices, The large transmitter button is factory
preset to operate the garage door opener_
8. Easy Limit Adjustment: Limits of door opening
and closing adjusted by turning screws without re-
moving chassis cover
9. Vacation Push Button: When the Vacation Push
Button is ON, the opener will not operate from the
transmitter The door will operate in the UP direc-
tion ONLY from the Wall Control (or optional Key
Switch accessory, Page 5).
SPECIFICATIONS
Type .....
Speed
Volts
Current
Gear reduction
Drive
Lubrication
Length of Travel
Travel rate
Lamp
Door linkage
MOTOR SAFETY
1t2 horsepower, permanent split capacitor
1500 rpm
120 Volts AC- 60 Hz Only
4 5 amperes
DRIVE MECHANISM
!6:1
Chain & cable with two-piece trolley on
steel Tee rail
Motor is self-lubricated, Drive shaft bronze
oil-fit e bearings
Adjustable to 7-1/2 feet
6 to 8 inches per second
On when door starts in travel, oft 4-t/2
minutes after stop, Also separate Work
Light push button
Adjuslable doer arm Pull cord Irotley
release
Electronic
Electrical
Limit device .
Limit adjustment
Start circuit
Persona! Push button & automalic reversal in down
direction Push button & automatic step tn
up direction
Independent up & down force adjustment
screws
Motor overload protector and low voltage
push button wiring
Circuil actuated by limit nut
Screwdriver adjustment on side panel
Low voltage push button or radio control
DIMENSIONS
Length (overall) . 12!-t/2 inches
Headroom required 2 inches
Shipping Weight 43 pounds
YOU' LL N EED TOOLS
During assembly and installation of your opener, the instruction will call for use of various hand tools. Have a
stepladder handy, and those tools illustrated below: Hammer, electric drill (also 3/16" and 5/16" drill bits), screw-
driver, adjustable end wrench or socket wrench kit, wire cutters, tape measure, pliers and hack saw.
Tape Measure
Stepladder
Electric Drill Socket Wrench
Pliers
Wire Cutters
Screwdriver
Hack Saw
Claw Hammer
Adlustable End Wrench
Loading ...
Loading ...
Loading ...