Kenmore 66572154300 gas range

User Manual - Page 10

For 66572154300.

PDF File Manual, 56 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ELECTRONIC OVEN CONTROL
2 3
++,++MEKI1;/ SLOW
,+ .... POULtrY CO01_ER
8
1. RECIPE RECALL TM
2. Slow Cooker
3. Display
4. Add 1 Minute
5, 7-1met
6, Cooktop Lockout
Cooktop Light (on some models)
9
CO0_
/
/
V
10 11
7. Oven Light/Oven Lockout
8+Oven Selectors (SERVE WARM)
9. LOGI-CLEAN TM
10. Temperature Setting
11. Timed Cooking
4 5 6 7
+uS
R !
12 13 14 15 16
12. Clock
13. Hour
14. Minute
15. Start
16. Stop/Clear
When power is first supplied to the appliance, make sure the
surface burners are in the OFF position. Everything on the display
will light up for 5 seconds. Then the time, "PF" will appear on the
display.
If "PF" appears at any other time, a power failure has occurred.
To remove "PF" and to reset the clock, press STOP/CLEAR.
When the oven is in use, this display shows time, temperature
and what command pads have been pressed.
When the oven is not in use, the display will show the time of day.
The START pad begins any function. If not touched after touching
a pad, "START?" will appear in the display.
If cooking is interrupted, touching START will resume the preset
cycle.
The STOP/CLEAR pad stops any oven function except for the
Clock, Timer and Cooktop or Oven Lockouts.
After pressing STOP/CLEAR, the display will show the time of
day or, if the minute timer is also being used, the time remaining.
Cook time may be added in 1-minute increments, up to 99
minutes, by touching the ADD 1 MIN pad.
Touching ADD 1 MIN during a cook cycle will add 1 minute of
cook time at the current cook power.
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
1. Press CLOCK.
2. Press the HOUR/MIN "up" or "down" arrow pads until the
correct time of day shows on the display.
Press CLOCK or START.
Tones are audible signals, indicating the following:
One tone
Valid pad press
Oven is preheating, or has been preheated
Function has been entered
10
Loading ...
Loading ...
Loading ...