Kenmore 91147829100 electric built-in double oven

User Manual - Page 20

For 91147829100.

PDF File Manual, 56 pages, Download pdf file

Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Self-CleaningCycle
=
Remove the broiler pan and grid,
utensils and any foil that may be in
the oven.
2, If your oven is equipped with
nickel oven racks, they should be
removed, If your oven is equipped
with gray porcelain-coated oven
racks, they may stay in the oven
during the self-clean cycle.
3. Soil on the front frame and outside
the gasket on the door liner will
need to be cleaned by hand.
Front Frame
/
}_11 Door Gasket
-"- Door Liner
Clean these areas with hot water,
soap-filled pads or cleansers such as
Soft Scrub ®to remove any soil. Rinse
well with clean water and dry.
Do not use oven cleaners - No
commercial oven cleaner of protective
coating of any kind should be used in
or around any part of the oven.
4. Wipe up any heavy spillovers on
the oven bottom.
5. Do not clean the door gasket. The
fiberglass material of the oven
door gasket cannot withstand
abrasion. It is essential for the
gasket to remain intact, If you
notice it becoming worn or frayed,
it should be replaced.
The door gasket is designed to have
a 18" gap at the bottom of the door.
This allows for proper air circulation.
Door Panel Gasket
Door Liner
It is normal for your oven door to give
the appearance of not having a good
seal against the oven, This is due to
the gasket. The location of the gasket
on the door maintains a good seal and
prevents any heat loss.
_ tensils should never be
left in the oven during a
self-clean cycle.
Nickel oven racks may be cleaned
during the self-clean cycle, but
will lose their luster and become
hard to slide. If you choose to
leave them in during the cycle,
wiping them down with vegetable
oil after the cycle will help them
slide easier.
Gray porcelain-coated oven racks
may safely be cleaned in the oven
during a self-clean cycle. It will be
necessary to grease the edges of
the oven rack with a light coating
of vegetable oil after a clean
cycle. This will help maintain the
ease of sliding the racks in and
out of the oven.
For the first clean cycle, vent the
room with an opened window or
hood vent. This will reduce the
odor when heating new pads.
2O
Loading ...
Loading ...
Loading ...