Loading ...
Loading ...
Loading ...
En
43
Communication Setup
This allows you to perform and/or change the
communication settings and select the type of
Internet connection from Cable. This setting is
required to use BD-LIVE functions, home networks
and software updates that connect to the Internet.
NOTE
• Make sure that the LAN cable is connected to
this player (see page 18).
• For manually performing the setting, the
following information of the connected router or
modem is required. Con rm the information prior
to the setting.
- IP address, netmask, gateway, DNS address
1. Press / to select “Settings”, then press
or ENTER.
2. Press / to select “Communication Setup”,
then press
or ENTER.
3. Press / to select “Ethernet Setup”, then
press or ENTER.
4. Press / to select “Change”, then press
ENTER.
Setting the info. Of the Ethernet
[Current Setup]
: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup
IP Address
Netmask
Gateway
DNS
Change
Initialize
• For initializing the current setting, select
“Initialize”, then press ENTER.
5. For setting the IP address, press
/ to
select “Yes” or “No”, then press ENTER.
Do you obtain the IP address
automatically?
IP Address
Netmask
Gateway
Next
Yes No
• If selecting “Yes”: The IP address is
automatically obtained.
• If selecting “No”: The IP address, netmask
and gateway are manually entered using the
screen for inputting characters. Regarding
each of the setup values, con rm the
speci cations of your broadband router.
6. Select “Next”, then press ENTER.
•
If selecting “
Yes
” in the step 5, go to the step 8.
7. Enter your DNS address.
Enter your DNS address.
Primary
Secondary
Next
• The primary and secondary DNS addresses
are entered using the screen for inputting
characters. Regarding each of the setup
values, con rm the speci cations of your
broadband router.
8. Select “Next”, then press ENTER.
9. For testing the connection to the Internet, after
con rming the settings, press
/ to select
“Test”, then press ENTER.
• “Test” is available only when setting to obtain
the IP address automatically. “Test” cannot
be selected if the IP address has not been
obtained automatically.
Confirm the current setting.
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
xxx xxx xxx xxx
: xx xx xx xx xx xx
IP Address
Netmask
Gateway
DNS Address
MAC Address
Test
Complete
• As a result of the test, if the Internet
connection fails, enter the setup values
manually.
10. Press
/ to select “Complete”, then press
ENTER.
11. Press HOME or EXIT to return to the Home
screen.
• To perform other settings, press
RETURN.
BD-SP309EUEn.indb43 2011/04/2816:07:00
Loading ...
Loading ...
Loading ...