Loading ...
Loading ...
Loading ...
Setting the signal en
19
M Setting the signal
Setting the signal
You can change the following settings:
■ The volume for the information
signals (e.g. at the end of the
program) and/or
■ The volume of the audible button
signals.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1. Set the program selector to
position 1. The washing machine is
switched on.
2. Press the ‹ button and, at the same
time, turn the program selector
clockwise to position 2.Release the
button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel
(e.g. at the end of the program).
Changing the volume
Use the û Finish in + or - button to
change the following settings at the
corresponding program selector
positions:
■ 2: The volume of the information
signals and/or
■ 3: The volume of the button signals.
Exiting setting mode
You can now end the process and set
the program selector to the Off ($)
position. The settings are saved.
H Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note: Place large and small items of
laundry evenly in the drum.
Faults and what to do about them
~ Page 22
1/2/3/... positions on the program
selector
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
Loading ...
Loading ...
Loading ...