Loading ...
Loading ...
Loading ...
STEP 7 INSTALL GRILLE PANEL
TWO PEOPLE ARE REQUIRED TO INSTALL
THE GRILLE PANEL.
• Push all four hinges on the grille panel to the open position.
• Hold the unified grille panel against the left side of the
opening. Drive 3 screws through the hinge and into the
back panel. Install the right side hinge. Then install the
center hinges.
• Grasp grille panel at the center and pull down to close.
The panel should align evenly with the beveled side
of the door.
NOTE: To adjust the grille panel backward or forward,
loosen the 2 attachment screws on all 4 hinges. Slide
the grille panel outward or to the back. Tighten the screws.
Loosen 2
Screws to
Adjust Grille
Panel
7
STEP 6 REMOVE BOTH GRILLE
PANEL FRAMES
• Grasp grille panel at the center, lift up to stop position.
• Remove 3 screws holding the grille panel frame
to the hinge on each side. Lift grille panel off
the hinges. Discard both panels and screws.
Leave hinges in open position. Do not push hinges back.
STEP 5 SECURE SIDE TRIM
TO CABINETRY
• Whenever possible, perform this additional step.
• Raise the grille panels to access cabinet side trims.
• Drill hole in trim and drive screw through the trim
and into each adjacent cabinet.
Drive Screws
through Case Trim and Into
Adjacent Cabinets
Remove
3 Screws
Grille Panel
Grille Panel
Loading ...