Loading ...
Loading ...
Loading ...
4
Install Screws and Bolts:
• Have someone hold the wall bracket centered in place
with each of the holes aligned with the correct opening
in the bracket and level with the horizontal line.
• Insert the lag screws through the bracket and into
the stud. Tighten with a wrench.
• Insert the bolts into the toggle by hand until snug.
Tighten with a wrench.
STEP 2 INSTALL ANTI-TIP BRACKET (cont.)
ALL REFRIGERATOR, ALL FREEZER
“X” MODELS ONLY
Install Wall Toggles:
The wall toggles and bolts can be ordered as Service
Kit #WR49X10193. Wall toggles are installed in the drywall
and metal studs for stability. Install the wall toggles
as follows:
• Drill 1/2" holes at the wall markings made in the holes
at the ends of the wall bracket.
• Hold the metal channel flat against the plastic straps
and slide the channel through the hole.
• Gently pull back at the ends of the plastic straps
to make the channel rest flush behind the wall.
• Hold the ends of the straps in one hand and slide
the plastic cap along the straps until the flange
of the cap is flush with the wall.
• Place your thumb between the plastic straps and bend
up and down to snap the straps off at the wall.
Remove Grilles for Access to Power Cord
and Anti-tip Locking Hooks
Fresh Food Unit
• Open the access door.
• Using a 1/4" hex driver, remove the 3 screws
at the bottom of the grille.
• Pull the bottom of the grille forward, down and out
to remove.
Metal Channel
Plastic Straps
Cap
Lag Screw
Wood Stud
Anti-Tip Wall Bracket
Bolt
Drywall or
Steel Stud
Wall Toggle
Screws
Anti-Tip Wall Bracket
Loading ...
Loading ...
Loading ...