Loading ...
Loading ...
Loading ...
4 6
QM00971-1
Operating
INFO
NETWORK
INTERACTIVE
Selecting an aspect ratio
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in sequence.
ASPECT
button
• The ASPECT button does not work when no proper signal is input.
• NORMAL mode keeps the original aspect ratio setting.
• You cannot select NATIVE when inputting 4K signal.
• If the ASPECT button is pressed when no signal is input, the pattern for
checking the aspect ratio is displayed. Use it to check the aspect ratio of a
screen when installing the projector. It disappears if the ASPECT button is
pressed again while the pattern is displayed.
NOTE
For an input signal from the LAN port, or if there is no signal
16:10 (xed)
For a computer signal
NORMAL 4:3 16:9 16:10 ZOOM NATIVE
For a video signal or component video signal
4:3 16:9 16:10 14:9 ZOOM NATIVE
For HDMI
TM
, HDBaseT
TM
, and DisplayPort
TM
signals
NORMAL 4:3 16:9 16:10 14:9 ZOOM NATIVE
For an SDI signal
NORMAL 4:3 16:9 16:10 ZOOM NATIVE
Loading ...
Loading ...
Loading ...