Loading ...
Loading ...
Loading ...
12 0
QM00971-1
SECURITY menu
Item Description
TRANSITION
DETECTOR
If this function is set to ON and the vertical angle of
the projector or the INSTALLATION setting is dierent
from the previous recorded setting, the TRANSITION
DETECTOR ON alarm is displayed and the input signal
is not displayed.
• To display the signal again, set this function OFF.
• After approximately ve minutes of displaying the TRANSITION
DETECTOR ON alarm, the light source turns o.
1 Turning on the TRANSITION DETECTOR
1-1 Use the ▲/▼ buttons on the SECURITY menu to
select TRANSITION DETECTOR and press the ►
or the ENTER button to display the TRANSITION
DETECTOR on/o menu.
1-2
Use the ▲/▼ buttons on the TRANSITION
DETECTOR on/o menu to select ON.
Selecting ON saves the setting of the current
angle and the INSTALLATION setting. The
ENTER NEW PASSWORD box (small) is
displayed.
1-3
Use the ▲/▼/◄/► buttons to enter a
password. Move the cursor to the right side
of the ENTER NEW PASSWORD box (small)
and press the ► button to display the NEW
PASSWORD AGAIN box, enter the same
password again.
1-4 Move the cursor to the right side of the
NEW PASSWORD AGAIN box and press
the ► button to display the NOTE NEW
PASSWORD box for about 30 second.
Make note of the password.
Pressing the ENTER button on the remote control or the
►
button on the
projector returns to the TRANSITION DETECTOR on/o menu.
• Do not forget your TRANSITION DETECTOR password.
• This function activates only when the projector is started after turning o
the AC power.
• This feature may not function properly if the projector is not in a stable
position when ON is selected.
2 Turning o the TRANSITION DETECTOR
2-1
Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/o menu.
2-2
Select OFF to display the ENTER
PASSWORD box (large). Enter the registered
password and the screen returns to the
TRANSITION DETECTOR on/o menu.
If an incorrect password is entered, the menu
closes. If necessary, repeat the process from 2-1.
3 If you have forgotten your password
3-1
Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/o menu.
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit
Inquiring Code is displayed inside the box.
3-3 Contact your dealer with the 10 digit Inquiring Code. Your password is
sent after your user registration information is conrmed.
(continued on next page)
ENTER NEW PASSWORD
box (small)
ENTER PASSWORD box
(large)
Loading ...
Loading ...
Loading ...