Loading ...
Loading ...
Loading ...
Moving your Schwinn ®438 Elliptical Trainer
To move the Schwinn _ 438 elliptical trainer,
carefully lift the rear end of the machine. Steer
the machine to the desired location. Be gentle
while moving the unit as any sharp impact
directly or indirectly to the computer can affect
computer operation.
Leveling your Schwinn ® Elliptical Trainer
Level the elliptical trainer to compensate tbr
uneven surl:aces. To level the Schwinn _ 438
elliptical trainer, raise or lower the two leveling
bolts located on the underside of the rear
stabilizer by screwing them in or out as needed.
Maintaining Your EJiiptical Trainer
ALWAYS DISCONNECT POWER TO THE
ELLiPTiCAL BEFORE SERViCiNG THiS
EQUIPMENT!
SERViCiNG THE UNiT WITH POWER
CONNECTED MAY CAUSE ELECTRICAL
SHOCKS, ELECTROCUTION OR
MECHANICAL iNJURY.
IMPORTANT: To avoid damaging the finish on
your elliptical trainer and computer, never use a
petroleum-based solvent when cleaning. Avoid
getting excessive moisture on the computer.
Daily: Belbre each use, inspect tbr loose,
broken, damaged, or worn parts. Do
not use your elliptical trainer if tbund
in this condition; repair or replace.
Weekly: Wipe any dust, dirt, or grime from the
surfaces. Use a damp cloth to wipe
your elliptical trainer and computer
t?ee of sweat.
46
Loading ...
Loading ...
Loading ...