User Manual Kwikset 99140-111 Convert Smart Lock Conversion Kit (Amazon Key Edition – Amazon Cloud Cam required), Compatible with Alexa in Satin Nickel

Kwikset 99140-111 Convert Smart Lock Conversion Kit (Amazon Key Edition – Amazon Cloud Cam required), Compatible with Alexa in Satin Nickel - Use Manual - Use Guide PDF.
Documents: Go to donwload!
User Manual
  • Owner's manual - (English)
Other Documents
  • Product Documentation - (English)
  • Installation Manual - (English)
  • Application Guide - (English)
  • Comparison Chart - (English)
  • User Guide - (English)


Begin with your smart home app

If you will be using a smart home app with your lock. download the app and set up your controller or hub before proceeding further with lock installation.

1 / 4

66492-001 Rev 02 ZigBee

Installation and User Guide

ENGLISH

Kwikset Technical Support

1-866-863-6584 www.kwikset.com

Tools needed

Existing key Phillips head screwdriver

Ruler

Optional: Masking tape

Prepare your door

Determine the parts needed for your door

Parts in the box

Kit "A" Kit "B" Kit "C"

Mounting plate screws Mounting plate screws Mounting plate screws

Black mounting plate

Interior cover Interior assembly Battery pack and 4 AA batteries

Silver mounting plate Gold mounting plate

Black adapter

Gold adapter

Gold adapter Black adapter

Silver adapter

Interior assembly screws

Interior assembly screws

Interior assembly screws

Interior cover screws Interior cover screws Interior cover screws

Make sure your existing deadbolt is compatible. If you have a standard deadbolt mounted separately from the handle below it. it is compatible with Kwikset Convert.

Make sure your door is aligned before proceeding with installation.

Look into the hole in your door.

What shape is your torque blade (the part sticking out through the latch)?

For a list of compatible deadbolt models. please see the Kwikset Convert page at www.kwikset.com

Mortise Lock

Not Compatible

Rim Lock

Integrated Interior

Not Compatible Compatible

D-shape

Kwikset and Weiser deadbolts:

Use kit “A” for your door.

Baldwin Reserve and Baldwin Prestige deadbolts:

Use kit “B” for your door.

You will need the black adapter and the thicker gold screws.

Vertical rectangle

Baldwin Estate deadbolts:

Use kit “B” for your door.

You will need the gold adapter and the thinner gold screws.

Slanted rectangle

Schlage deadbolts:

Use kit “C” for your door.

You will need the silver adapter.

Horizontal rectangle

Schlage deadbolts:

Use kit “C” for your door.

You will need the gold adapter.

Make sure your door is open and extend your latch bolt. Make sure your key is NOT in the deadbolt exterior.

Remove all existing deadbolt hardware from the interior side of your door. Optional: Secure your deadbolt exterior with masking tape. Measure to confirm that your door is either 1-3/8" or 1-3/4" (35 mm or 44 mm) thick.

1-3/8"or 1-3/4" 35 or 44 mm

You should be able to lock and unlock your door smoothly without any resistance. and without pushing. pulling or lifting your door.

If your door is not aligned. you may need to order a Warped Door Service Kit. available through Kwikset Support: 1-866-863-6584

2 / 4

Install the mounting plate and test your latch

Note: A D-shaped torque blade is shown. but installation is the same for all models.

Place the mounting plate on the door so that the torque blade inserts through the center hole.

Kwikset & Weiser Only: To determine which mounting screws to use. test one of the thicker screws first.

If the thicker screw fits. continue installing the thicker screws.

If the thicker screw doesn't fit. install the thinner screws.

Remove the masking tape from the exterior deadbolt. and insert your key and test the latch for smooth operation.

Remove your key and make sure the bolt is fully extended.

If the latch does not extend or retract smoothly. adjust the mounting screws.

Keep parallel to the edge of the door.

Tighten screws evenly.

Secure the mounting plate with the mounting screws.

Install the interior assembly

Secure with two (2) interior assembly screws.

Remove the interior cover and battery pack.

Gold adapter: Keep slot vertical.

Press adapter firmly onto the interior assembly.

Install the adapter on the interior assembly.

Silver adapter: Tab is on bottom.

Black adapter: Curve is on top.

Make sure the turnpiece is in the vertical position.

Remove the interior cover.

Remove the battery pack.

Do not install batteries yet. vertical

Make sure shaft is oriented as shown. If needed. rotate the shaft to this position.

Stripe should be vertical.

Align the adapter with the torque blade and push the interior assembly onto the mounting plate.

Schlage Deadbolts Only:

You may need to rotate the adapter to align with the torque blade.

3 / 4

Pair the lock with your smart home system

If you wish to unlock the window. you can slide it up for more convenient access to the programming buttons while the cover is installed.

To unlock the window. remove the security screw.

The window on the interior cover is locked by default to prevent someone from tampering with your lock's settings.

Important Information about the interior cover

Cover Installation:

Install cover.

Note: You may need to rotate the turnpiece to align with the turnpiece shaft.

Install screws.

Install the interior cover

Initiate the pairing process through your smart home system (either through your smart home app. at your panel. or at your controller or hub).

Refer to your smart home system instructions for more information.

When prompted by your smart home system to initiate pairing at the lock. press button “A” on the lock interior four times.

If successful. re-name the lock in your system (if applicable).

If unsuccessful. press button “B” nine times.

Perform steps 8A-8C again.

If still unsuccessful. follow your smart home system's instructions to remove (exclude/unpair) the lock from any other network. Then perform steps 8A-8C again.

Note: The interior cover and screws must be removed for battery pack access.

Confirm the lock status

Perform the door handing process

The Status LED blinks every six seconds to communicate whether the door is locked or unlocked.

If the Status LED is displaying the wrong lock status. flip switch #4.

Amber: Locked Green: Unlocked

Switch #4

This step will teach the lock the orientation of your door and is crucial for lock operation.

Install 4 AA batteries in the battery pack.

Ensure correct polarity.

For best results. use new. non-rechargeable Alkaline batteries only.

Make sure the door is open. Insert the battery pack while PRESSING AND HOLDING the Program button.

Keep pressing the button for three seconds after the battery pack is installed. then release the button.

The Status LED will flash red and green. and the lock will beep.

Press and release the Program button again.

The latch bolt will retract and extend on its own to learn the orientation of the door. Did the Status LED turn green or red?

If the bolt does not move. make sure the batteries are installed correctly. and perform steps 6A-6D again.

Metal contacts at bottom. facing out.

BALDWIN ESTATE DEADBOLTS:

If your latch bolt is to the RIGHT of your interior assembly. and the Status LED is solid red after door handing. press and release the Program button again. The door handing process will restart.

If you are unsure if your lock is Baldwin Estate. see chart on page 1 or compatible deadbolt list online.

Red Status LED

Green: Door handing successful. Continue to step 7.

Red: See “Red Status LED” below.

Right

OTHER DEADBOLTS:

If the Status LED is solid red after door handing. make sure the batteries are installed correctly and the lock interior is correctly installed. Perform steps 6A-6D again.

4 / 4

+ 2017 Spectrum Brands. Inc.

Reference Guide

Factory Reset

A factory reset will remove your lock from your smart home system.

Status LED

1 Remove battery pack.

2 Press and HOLD the Program button while reinserting the battery pack.

Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.

3 Press the Program button once more.

When the LED flashes green and you hear two beeps. the lock has been reset.

4 Perform the door handing process again to teach the lock the orientation of the door and pair the lock to your smarthome system.

1. Read all instructions in their entirety.

2. Familiarize yourself with all warning and caution statements.

3. Remind all family members of safety precautions.

4. Always have access to your lock’s standard key.

5. If using the Auto-Lock feature. make sure to have your standard key with you to prevent locking yourself out.

6. Replace low batteries immediately.

CAUTION: Prevent unauthorized entry. Restrict access to your lock’s back panel and routinely check your settings to ensure they have not been altered without your knowledge.

WARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means. or evaded by entry elsewhere on the property.

No lock can substitute for caution. awareness of your environment. and common sense. Builder’s hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk. you should consult a qualified locksmith or other security professional.

Important Safeguards

Kwikset Convert at a Glance

Button “A” Back panel

Program button

Turnpiece shaft

Switches

Button “B”

Status LED

Switches

1. Status LED

Door lock status LED blinks every 6 seconds. ON position is factory default.

2. Auto-Lock

Automatically re-locks door 30 seconds after unlocking. OFF position is factory default.

CAUTION: With this feature enabled. it is possible to lock yourself outside.

3. Audio

Beeping sound is heard during programming and normal operation.

ON position is factory default.

4. Invert

Only used if the Status LED is communicating the opposite door lock status.

Status LED Notifications

Amber flash Door is locked Green flash Door is unlocked.

Red flash The 4 AA batteries in the interior are low and need to be replaced.

Network Information

ZigBee System Notes

ZigBee is a “Wireless mesh network. and results may vary based on building construction and communication path. with 35+ feet being typical installed distance in a standard home environment and 250 feet+ when the lock has a clear line of sight with the smart home controller or hub. It may be necessary to install additional ZigBee devices to enhance the communication path between the lock and controller/hub for a more robust ZigBee network.

Removing the lock from the network

Press button “B” on the lock interior nine times.

These features can be adjusted in some smart home apps.



Newest Added: 916TRL TSCR ZB 3.0 L03 99170-003 99540-002 99140-110 909L03SMTCP

Kwikset 99140-111 | File type: PDF | Filename: 71929147_99140-111.pdf | Size: 2.26 MB | Language: English | Other documents: 5 files.

Download User Manual

Product Infomation and Reviews - 99140-111 photo

99140 111 Photo

T: @manualsFile

https://manualsFile.com