Loading ...
ll=====l_l =,ul Hll ==l=
LOOK FOR THIS SYMBOL TO POINT
OUT IMPORTANT SAFETY PRECAU-
TIONS. IT MEANS - A'I-rENTION! BE-
COME ALERT! YOUR SAFETY tS IN-
VOLVED.
CAUTION: LOOK FOR THIS WORD TO POINT Oi
IMPORTANT EQUIPMENT PRECAUTION
RULES FOR SAFE OPERATfON
WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covere
brush-covered or grass covered land unless the engine s exhaust system is equipped with a spark arrestor meeting applicable local or art
laws (if any) If a spark arrestor is used, it should be maintained in effective working order be the operator. {See REPAIR PARTS for pz
number identification).
Inthe State of California the above is required by taw (Section 4442 of the California Public Resources Code). Other States may have simit
laws. Federal laws apply on federal lands
1.1 Know the controls and how to stop quickly. READ THIS
OPERATORS MANUAL and instructions furnished with
attachments.
2. Do not allow children to operate the machine Do not allow
adults to operate it without proper instruction..
3 Do not carry passengers. Do not mow when children and
others are around.
4,. Always wear substantial footwear. Do not wear loose fitting
clothing that could get caught in moving parts
5. Keep your eyes and mind on your tractor, mower, and the
area being cuL Do not let other interests distract you.
6. Do not attempt to operate your tractor or mower when not in
the drivers seat.
7. Always get on or off your tractor from the operator's left hand
side°
8 Clear the work area of objects (wire, rocks, etc )which might
be picked up and thrown°
9. Disengage allattachment clutches before attempting to start
the engine.
10. Disengage power to attachments and stop the engine before
leaving the operator's position..
11_ Disengage power to mower, stopthe engine, and disconnect
spark plug wire(s) from spark plug(s) before cleaning, making
an adjustment, or repair. Be careful to avoid touching hot
muffler or engine components.
12o Disengage power to attachments when transporting or not in
use,,
13o Take alt possible precautions when leaving the vehicle
unattended, Disengage the power4ake-off, lower the attach-
ments, shift into neutral, set the parking brake, stop the
engine, and remove the key_
14. Do not stop or start suddenly when going uphill or downhill.
Mow up and down the face of slopes (not greater than 15°);
never across the face. Refer to page 37.
15. Reduce speed on slopes and make turns gradually to prevent
tipping or loss of control. Exercise extreme caution when
changing direction on slopes.
16, While going up or down slopes, ptace Gear Shift Control
Lever In 1st gear position to negotiate the slope without
stopping
17,. Never mow in wet or slippery grass, when tractionis unsure,
or at a speed which could cause a skid.
18, Stay alert for holes in the terrain and other hidden hazards,
Keep away from drolmoffs,
19. Do not drive too close to creeks, ditches, and public high-
ways.
20. Exercise special care when mowing around fixed objects in
order to prevent the blades from striking them_Never delib-
erately runtractor or mower intoor over any foreign objects
21. Never shift gears until tractor comes toa stop.
22_ Never place hands or feet under the mower, in discharge
chute, or near any moving parts while tractor or mower are
running. Always keep clear of discharge chute,.
23° Use care when pulling loads or using heavy equipment.
a. Use only approved drawbar hitch points°
b. Limit loads to those you can safely control..
c. Do not turn sharply Use care when backing.
d_ Use counterweight orwheel weights when suggested
owner's manuals.
24. Watch out for traffic when crossing or neat roadways
25 When using any attachments, never direct discharge
material toward bystanders nor allow anyone near the v
hlcle while in operation
26 Handle gasoline with care - it is highly flammable.
a. Use approved gasoline contatners.
b. Never remove the fuel cap of the fuel tank or ac
gasoline to a runningor hot engine or an engine that h_
not been allowed to cool for several minutes after ru_
ning. Never fill tank indoors, aiways clean up spill_
gasoline.
c Open doors if the engine is run in the garage - exhau
fumes are dangerous_ Do not run the engine indoors
27 Keep the vehicle and attachments in good operating conc
tion, and keep safety devices in place and working
28. Keep all nuts, bolts, and screws tight to be sure the equiI
ment is in safe working condition
29. Never store the equipment with gasoline in the tank inside
buildir_g where fumes may reach an open frame or spar
Allow the engine to coot before storing in any enclosure
30. To reduce fire hazard, keep the engine free of grass, leave
or excessive grease_ Do not clean product while engine
running
31.. Except for adjustments, DO NOT operate Engine if
cleaner or cover directly over carburetor air intake is r_
moved.. Removal of such part could create a fire hazard.
32. Do not operate without a muffler, or tamper with exhau
system Damaged mufflers or spark arresters coufd create
fire hazard. Inspect periodically and replace if necessary.
33 The vehicle and attachments should be stopped and i_
spected for damage after striking a foreign object, and tl"
damage should be repaired before restarting and operatin
the equipment.
34 Do not change the engine governor settings or overspeed th,
engine; severe damage or injury may result.
35. When using the vehicle with mower, proceed as follows:
a. Mow only in daytight or in good artificial light.
b. Shut the Engine off when unclogging chute
c. Check the blade mounting bolts for proper tightness z
frequent intervals.
36. Do not operate the mower without either the entire gras
catcher, on mowers so equipped, or the the deflector shiel
in place..
37. Disengage power to mower before backing UpoDo not mo_
in reverse unless absolutely necessary and then only aft_
careful observation of the entire area behind the mower.
38. Under normal usage the grass catcher bag material is subje_
to deterioration and wear. Itshould be checked frequently fc
bag replacement Replacement bags should be checked t
ensure compliance with the original manufacturer's recorr
mendations or specifications.
Loading ...
Loading ...
Loading ...