Loading ...
Loading ...
Loading ...
Setting Warm Zone
Controls (if equipped)
Use the warm zone to keep cooked
foods hot such as: vegetables,
gravies, casseroles, soups, stews,
breads, pastries and oven-safe dinner
pates.
OFF
HI
MED
WARMERZONE
Warm Zone Recommended Food
Settings Chart
Food Item Heating
Level
Breads/Pastries LO
Casseroles LO
:Dinner Plates with Food LO
Eggs LO
iGravies LO
iMeats MED
Sauces MED
Soups (cream) MED
Stews MED
Vegetables MED
Fried Foods HI
Hot Beverages HI
Soups (liquid) HI
To Operate the Warm Zone
The purpose of the warm zone is to keep hot cooked foods at serving
temperature. Always start with hot food. It is not recommended to heat
cold food on the warm zone.
All food placed on the warm zone should be covered with a lid or
aluminum foil to maintain quality. For best results, when warming pastries
or breads, the cover should have an opening to allow moisture to escape.
Do not use plastic wrap to cover food. Plastic may melt onto the
surface and be very difficult to clean.
Useonly dishware, utensilsand cookware recommended for oven and
cooktop use on the warm zone.
Unlike the surface elements, the warm zone will not glow red
when it is hot.
Always use potholders or oven mitts when removing food
from the warm zone as cookware and plates will be hot.
To Set the Warm Zone Control
rn
1. To set the control, push in and turn the knob. The temperatures are Z
approximate, and are designated by HI, MED and LO. However, the
control can be set at any position between HI and LO for different levels r_
of heating.
2. When done, turn the control to OFF. The warm zone will remain warm "t"
until the hot surface indicator light goes off.
Temperature Selection
Refer to the chart in the side column for recommended heating levels. If a
particular food is not listed, start with the medium level, and adjust as
needed. Most foods can be kept at serving temperatures by using the
medium level.
Indicator Lights
The surface indicator light is located below the warm zone control. It
turns on when the control is set, and stays on until the control is turned
off. The hot surface indicator light, located under the glass cooktop, will
come on when the control is set and will continue to glow until the glass
cooktop has cooled down to a moderate level.
WARM & READy ZONE KNOB
\
INDICAIOR LIGHT
WARM & READy ZONE
The cooktop and control panel shown above are representational. Your
range may have a different design look and different features.
9
Loading ...
Loading ...
Loading ...