GE - General Electric PLD621RTSS GE Profile 21" Drop-In RV Gas Range

User Manual - Page 11

For PLD621RTSS.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
49-2001047 Rev. 3 11
CooktopSurfaces
CARE AND CLEANING: Cooktop Surfaces
Besureallcontrolsareoffandallsurfacesarecoolbeforecleaninganypartoftherange.
PorcelainEnamelCooktop
Do not use oven cleaners, abrasive cleansers, strong
liquidcleansers,steelwool,plasticscouringpads,or
cleaning powders on the cooktop surface. Clean with a
mildsoapandwaterora50/50solutionofvinegarand
water. Rinse with clean water and dry with a soft cloth.
When cleaning surfaces, make sure that they are at
room temperature. Spillage of marinades, fruit juices,
tomatosaucesandbastingliquidscontainingacidsmay
cause discoloration and should be wiped up as soon as
hotsurfacescool,thencleanandrinse.Usecautionto
not spill water into cooktop openings.
RemovingtheCooktopforCleaninginCaseofSpillage
WARNING
Careshouldbetakentonotdamage
ormodifygastubingandwiringundercooktop.
Doing so may result in fire or explosion hazard.
1.Disconnectpoweratthemainfuseorcircuitbreaker
panel before removing cooktop.
2. Lift up and remove grate from cooktop.
3. Remove the 4 screws on the cooktop with a Phillips
screwdriver, then lift up on the cooktop to remove.
4. Clean with a mild soap and water solution with a
damp cloth. Rinse with clean water and dry with soft
cloth.
5. Place the cooktop back into position and attach with
the 4 screws using a Phillips screwdriver.
Burner Caps
Wipe burner caps with hot, soapy water and rinse with
cleanwater.Youmayscourwithaplasticscouringpad
to remove burned-on food particles.
Burner Heads
Wipe the burner heads routinely, especially after bad
spillovers which could clog the burner openings. Wipe
with hot, soapy water. Rinse with clean water. For more
stubborn stains, use a brush with plastic bristles.
NOTE: Do not use steel wool or scouring pads to clean
the burner parts as these may clog the openings. The
ports in the burner heads must be kept clean at all times
for an even, unhampered flame. Clogged or dirty burner
ports or electrodes will not allow the burner to operate
properly.
Burner Grates
Grates should be washed in hot, soapy water and rinsed
with clean water. To soften burned-on food, place grates
in a solution containing ¼-cup of household ammonia
for several hours. Afterward, scrub grates with a plastic
scouring pad soaked in hot, soapy water. Rinse well
anddry.DONOTusebleachorrustremoversonthe
cooktop or burner grates.
27°
Remove Grate
4 Screws
Loading ...
Loading ...
Loading ...