CRIMPING & WIRE
STRIPPING KIT
■ STOCK No.33079. ■ PART No.CT/WS.
01/98
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO
ENSURE THE SAFE AND EFFECTIVE USE OF THIS KIT.
1 IMPORTANT:
Oil here before use.
2 To cut cable, place cable
between cutter blades ❄✪❆
and fully close handles.
3
To strip cable, clamp cable
between front blades ❄✫❆.Use
the metric or imperial
graduations marked on the
lower jaws ❄✬❆ to control the
length to be stripped.
4
Gently squeeze the handles
together and the cable is held
by external jaws, as the
insulation is lightly cut without
damaging the conductors. For
cables with a hard, or soft
sheath, change the blade
pressure by turning the
adjusting knob ❄✭❆.
5
To cut larger diameter cable,
turn the adjusting knob ❄✭❆
clockwise. To cut smaller
diameter cable, turn
anticlockwise.
6 As the handles are closed,
the sliding action of the
blades removes the
insulation up to 14mm in
length.
W
IR
E
C
U
TTE
R
1.5
2.5
6
1
.5
1.5
2
.5
2.5
4-6
NON INSULATED
ROUND TERMINALS
IS
O
M
3
.5
M
4
M
5
M
3
M
2
.6
IGNITION
TERMINALS
NON INSULATED
SQUARE TERMINALS
IN
S
U
L
T
E
R
M
IN
A
L
S
DRAPER TOOLS LIMITED, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HAMPSHIRE. SO53 1YF. U.K.
TEL: (01703) 266355. FAX: (01703) 260784
WIRE CUTTER
FOR CRIMPING INSULATED
TERMINALS 1.5, 2.5, 6mm
2
FOR SHEARING METRIC (ISO)
BOLTS. THREADED M2.6, M3.0,
M3.5, M4.0, M5.0
FOR CRIMPING SQUARE
NON-INSULATED TERMINALS
1.5 AND 2.5mm
2
FOR CRIMPING ROUND
NON-INSULATED TERMINALS
1.5, 2.4 AND 4-6mm
2
FOR CRIMPING
IGNITION TERMINALS
