Loading ...
Loading ...
Loading ...
Troubleshooting
FM tuner (YSP-4300 only)
FM stereo reception is The characteristics of FM stereo broadcasts Check the antenna connections. 20
noisy, m:,y cause this problem when tile Try using a high-quality directional FM antenna.
transmitter is too far away or the antenna
input is poor. Switch to monaural mode. 45
There is multi-path interference. Adjust the antenna position to eliminate multi-path
interlerence.
The characteristics of FM stereo brnadcasts
may cause this problem when the
transmitter is too far away nr the antenna
input is poor.
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
The desired station
cannot be tuned into
Use a high<luality direclional FM antenna.
Use the manual tuning method.
with the automatic 44
tuning method.
Previously preset This unit has been disconnected till" a long Preset the stations again.
stations can no longer period. 45
be tuned into.
USBdevice(YSP-4300 0nly)
The USB device is not The USB device is nnt prnperly connecled Turn nil this unit and recnnnecl the USB device.
54
recognized, to the USB jack on this unit.
The USB device has been formatted using a Use a USB device formatted using the FAT I6 or
file system nlher than FAT16 or FAT32. FAT 32 file system (except USB hard drives).
Folders and files stored The USB device uses a file structure that This unit can recognize a folder hierarchy with up
on the USB device are this unit is unable to recognize, to 8 layers, and up to 65,000 files per layer. Modily
the lolder structure on the USB device to meet these
not displayed, specifications.
Data stored on the USB device is Use a USB device that does nol support encryptinn.
encrypted.
Remotecontrol
The remote control The wrong distance or angle. The remole control functions withill a maximum
does not work and/or range o1:6 m (20 fl) and no more than 30 degrees 16
function properly, nllCaxis fi'om the h'ont panel.
Direcl sunlight nr lighting (h'om an inverter Repositinn this unit.
type nl lquorescent lamp, etc.) is striking
the remole control sensor nl this unit.
The batteries are weak. Replace all batteries. 16
The TV cannot be The TV Remote Repeater funclion is Enable the TV Remote Repealer hmction. 12
operated using the TV disabled.
Remote Repeater A remote cnntrnl using technology other The TV Remote Repeater functinn cannot be used.
function, than infi'ared is used (this unit may not Mnve the center unit so that it does not block the
suppnrt some infi'ared remole controls), remnle control sensor on the TV, and use the TV's
remote cnmrnl to nperale the TV.
The center unit and TV are Ion close Move the center unit Io adjusl the distance between
together or ton lar apart, the TV Remole Repealer and the TV (remole 12
cnntrol sellsor). If" necessary attach or remove
center unit spacers.
The center unit's power cable is unphlgged. Plug in the power cable. 18
There is an objecl, such as a power cable, Remove the nbslacle.
between the center unit and TV.
70 En
Loading ...
Loading ...
Loading ...