PTB5636SS Cyclone Pro Collection Series 36 Inch Stainless Steel Ducted Canopy Pro Style Under Cabinet Hood

User Manual - Page 5

For PTB5636SS.

PDF File Manual, 16 pages, Read Online | Download pdf file

PTB5636SS photo
Loading ...
Loading ...
Loading ...
5Cyclone Undermount Installation - English
DAMAGE INSPECTION
Please fully inspect unit for damage before installation.
If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement.
If the unit is damaged by the customer, repair or replacement is the responsibility of the customer.
If the unit is damaged by the installer (if other than the customer), repair of replacement must be made by arrangement between
customer and installer.
Once installed, all damages will be assumed the responsibility of the installer.
DUCTING
To reduce the risk of re, use only metal ductwork.
To reduce risk of re and to properly exhaust air, be sure
to duct air outside – do not vent exhaust air into spaces
within walls, ceilings, attics, crawl spaces, or garages.
WARNING
Best to use rigid type metal ducts. Flexible ducts can
restrict airow by more than 50%.
Reduce the number of transitions and turns as much as
possible. If a reducer is used, install a long reducer instead
of a pancake reducer. If turns and transitions are required,
install them as far away from the opening as possible and
as far apart between two as possible.
CAUTION
6” round ductwork must be used to maintain maximum
air ow eciency with motors of 450 CFM or greater. If
the use of any size ducting is less than 6”, the warranty is
automatically voided.
e venting duct must go horizontally or vertically up
to the outside wall or the roof. If it is turned downward
anywhere in the venting system, the warranty is automatically
voided.
WARNING
Fasten all connections with sheet metal screws and tape all joints
with certied aluminum foil tape or duct.
Do not cut a joist or stud unless absolutely necessary. If a joist or
stud must be cut then a supporting frame must be constructed.
Before making cutouts make sure there is proper clearance within
the ceiling or wall for the exhaust vent.
Examples of dierent types of ventilation for
undermounts:
Roof Pitch with Cap
and Flashing
Side Wall Cap with
Gravity Damper
Side Wall Cap
with Gravity
Damper
Soffit or Crawl Space
Additional parts not provided.
Loading ...
Loading ...
Loading ...