Loading ...
Loading ...
Loading ...
11Cyclone Undermount Installation - English
4. Install the plastic damper using the rubber seal and the 6 x ⅝”
screws provided. (Figure 3)
5. Once anchors are installed, secure the hood to the wood
cleat using the 1 ⅛” screws provided. Use the 1 ¼” screws to
secure the back panel of the hood to the anchors in the wall.
(Figure 4)
Figure 3
Screws
Mounting
Cleat
Wall Anchor
Figure 4
Under Mount Installation Instructions
*FOLLOW THE STEPS FOR WALL MOUNT INSTALLATION
In Addition:
1. Cut an access hole in your cabinet for the damper and
ducting. Note: e damper should be installed at the end
when connecting the duct. (Figure 5)
2. ere are 5 pilot holes located at the top of the hood. Use the
5 x ⅝” screws provided to secure the hood to the cabinet.
(Figure 6)
Access Hole
Figure 5
Figure 6
Screws
Mounting
Cleat
Wall Anchor
Loading ...
Loading ...
Loading ...