Loading ...
Loading ...
Loading ...
nsta ation instructions
Before you begin - read these instructions comp[ete[y and carefu[[yo
Electric Shock Hazard
Read and follow the IMPORTANT SAFETY iNSTRUCTIONS outlined in this
User Guide before operating this appliance, pages 3 .- 5o
Improper connection of an equipment-grounding conductor can result in a
risk of electric shock° Check with a qualified e_ectrician or serviceman if you
are in doubt as to whether the appliance is propedy grounded°
Do not modi_ the plug provided with the appliance .- if it will not fit the
out_et, have a proper out_et installed by a qualified e_ectdciano
Failure to do so can result in death, e_ectric shock, fire or injury to persons°
Observe aft governing codes and ordinances.
h_stallation Requirements
Location
Your washer must be installed on firm flooring to minimize vibration during spin cycles, Concrete
flooring is best, but a wood base is sufficient providing the floor support meets FHA standards,
Your washer should not be installed on rugs or exposed to the weather,
Water Temperature
",,!ourcold water should not exceed 95°F (35°C) or your hot water exceed 149°F (65°C).
Temperatures above this may damage your washer.
Shut Off Valves
Both hot and cold shuboff valves (faucets) should be available in the laundry area.
Drain
Water may be drained into a standpipe or set tub/s[nL The standpipe must be 1 Y2"(38 ram)
minimum intedor diameter and must be open to the atmosphere.
E[ectdca[
This appliance must be supplied with 110V- 120V, 60Hz electrical supply and connected to an
individual, properly grounded branch circuit, protected by a 15 or 20 amp circuit breaker or time
delay fuse.
Loading ...
Loading ...
Loading ...