Loading ...
Loading ...
Loading ...
Changing p e-seI options
Outoof-Balance recovery routine
When your AquaSmart _ is spinning it can sense if the
wash load is oubofibalance and will stop and re-try
spinning up to 3 times. If it still senses an unbalanced
load there are two options the machine can take,
Automatic Recovery option
",/our Aqu_Sm_rt _ will try to automatically correct the
oubof-baBnce load. It will fill with water and agitate
to redistribute the load before trying to spin up again,
Machine Stops option
",/our AquaSmart _ will stop, give a short burst of beeps
every 5 seconds, and the spin speed lights will flash.
You must redistribute the load more evenly yourself,
(Use this option if you wish to conserve water),
",,!ourwasher arrived with the 'Machine Stops'
option set.
1 Enter Options Adjustment mode (refer to page 28).
2 Select SOAK to program your Aqu_Smart _ to
automatically recover,
s Press POWER to saveyour selection,
'I
2
Reset Back to Factory Settings
If you would like to reset a[[ settings back to those
that were set when your AquaSmart _ left the factory
you have the option of selecting RESETDEFAUUTS,
Enter Option Adjust Mode (page 28),
Press and hold the START/PAUSE button until you
hear one quick beep, This indicates that all settings
have been returned to the factory default settings,
Soak
SOAK
lighton=automaticrecovery
SOAK
lightoff=machinestops
Fig.21 Adjusting Out-o#Ba/_Tnce
recovery _o_¢ine
Fig22 Re etting f_ctory deETults
Loading ...
Loading ...
Loading ...