Loading ...
Loading ...
Loading ...
Fabdc Softener
OMy dispensing modds have softener d_spendng abifityo Fabric softener should NOT be used
unless your machine has fabric softener dispensing abifityo
Choosing the fight cycle
If you wish to use fabric softener you will need to select the FABRICSOFTENERoption which will
give you a deep rinse, If FABRKISOFTENERis not selected, the softener will not be dispensed.To
have fabdc softener dispensed select the FABRICSOFTENERoption to ON.
Adding the fabric softener
Measurethe fabric softener out into the cap and pour into
the Fabric Softener Dispenser, It will remain in the top of the
dispenser until the deep rinse when water flushes it into the tub.
Note: If you fill beyond the MAX mark, the overflow will pour
fabric softener into the basket prematurely and contribute to
scrud (refer below).
Cleaning the dispenser
Fig 15Adding softener into
Me Fobric Softener dispen er
The funnel of the fabric softener (the top) clicks off easily. Simply place a finger down the center
and lift. The remaining siphon tube and Fabric Softener well is not removable and needs to be
wiped clean periodically with hot water and an old toothbrush. If the siphon tube looks partially
blocked use a cotton bud to clean.
Scrud
Fig. l d Removing the F_bric Softener funnel
Scrud is the name given to the waxy build-up that can occur within any washer when fabric
softener comes into contact with detergent, This build-up is not brought about by a fault in the
washer, If scrud builds up in the washer it can result in stains on the clothes or an unpbasant
smell in your washer,
If you wish to use fabric softener we recommend you:
Use it sparingly,
Measure it carefully to ensure you do not fill above the MAX level,
Clean the dispenser as soon as the cycle has finished,
Clean your washer regularly using the CLEAN ME cycle (see page 32),
Cold water washing increases the chance of this build-oup occurring. We recommend a warm or
hot wash at regular intervals, eg. every 5th wash.
Loading ...
Loading ...
Loading ...