Loading ...
Loading ...
Loading ...
® #AREAN##Z NIN8
Self-CleaningCycle
1. Remove the broiler pan and grid,
oven racks, utensils and any foi!
that may be in the oven.
2. Soil on the front frame, 1" inside
the oven, and outside the door
gasket will need to be cleaned
Front frame
L
Door gasket
Door liner
by hand.
Clean these areas with hot water,
soap-filled steel wool pads or
cleansers such as Soft Scrub _' to
remove any soil. Rinse wel! with
clean water and dry.
3. Wipe up any heavy spillovers on
the oven bottom.
4. Do not clean the door gasket.
The fiberglass material of the
oven door gasket cannot
withstand abrasion. It is essential
for the gasket to remain intact.
If you notice it becoming worn,
frayed or displaced on the door
it should be replaced,
The door gasket is designed to have
a 5-6" gap at the bottom of the door.
This allows for proper air circulation.
Door panel Gasket
Door liner
It is normal for your oven door to give
the appearance of not having a good
seal against the range. This is due to
the gasket. The location of the gasket
on the oven door maintains a good
seal and prevents any heat loss.
/_@ Utensils should never
be left in the oven
during a self-clean cycle.
The oven racks may be cleaned
during the self-clean cycle, but
will lose their luster and become
hard to slide. If you choose
to leave them in during the
cycle, wiping them down with
vegetable oil after the cycle
will help them slide easier.
For the first clean cycle, vent
the room with an opened
window or hood vent. This
will reduce the odor produced
kwhen heating new parts.
.... j_
18
Loading ...
Loading ...
Loading ...