Loading ...
Loading ...
Loading ...
Installation Instructions
REPLACING THE FREEZER DRAWER (on some models}
Two people may be required to complete
this procedure.
m REPLACE THE BASE GRILLE
(if removed earlier)
CAUTION: Becorefulnotto
overtighten the screws since this mag crack
the grille.
Align the base grille and replace the 2 Phillips-
head screws on either side of the base grille.
r2l ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
_-l Pull out the rail assemblies to the full length on
each side of the cabinet.
\
rB1 There are two tabs on each drawer rail and two
slots on each rail assemblLl on the refrigerator.
Align the drawer rails with the rail assemblies,
tilt the drawer toward the refrigerator, and seat
the tabs into the slots of the rail assemblg.
Lower the drawer into position.
Slot Tab
[] ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES (CONT.)
[] Replace the hex-head screws to secure
the drawer.
r31 REPLACE THE FREEZER BASKET
r-_ Tilt the basket forward and lower it into the
drawer.
r_ Lower the freezer caddg ensuring the hook fits over
the front edge of the bottom freezer basket. Push
down to secure.
rc1 seat the basket onto the metal slide brackets and
over the swing locks.
[] Turn the swing locks from horizontal to vertical
position to lock the basket in place.
r_ Turn the divider slightlg to one side so the tabs
on the front fit into the vent slots on the basket.
Position the divider so the back locating tabs snap
into place in the back vent slots.
\
26
Loading ...
Loading ...
Loading ...