Loading ...
Loading ...
Loading ...
EN
25
6.6 CLEANING THE WATER INTAKE FILTERS
The machine is fitted with a filter which protects the water intake valves.
The filter is in the fitting on the intake hose which is connected to the tap
The filter must be cleaned if the washer-dryer is not taking in water or the
amount of water is insufficient.
To clean, proceed as follows:
Remove the mains plug to disconnect the appliance from the
electricity supply.
Turn off the water tap.
Unscrew the intake hose fitting from the tap.
Remove the intake hose fitting filter.
Clean the filter with water, with the aid of a small brush.
When screwing the intake hose fitting back into place, check that the filter is positioned
correctly.
6.7 PERIODIC CLEANING
Carry out periodic cleaning to keep the appliance in good working order (see CLEANING AND
MAINTENANCE section) to prevent the build-up of limescale, unpleasant odours and
mould. A descaler can be used, following the instructions supplied with the descaler. Clean
the dispenser drawer at least once or twice a month to avoid the build-up of detergent.
Periodically check the water supply filters. See the procedure outlined in the manual.
Loading ...
Loading ...
Loading ...