Smeg WDF147-2 Washer dryer

User Manual - Page 11

For WDF147-2.

PDF File Manual, 31 pages, Read Online | Download pdf file

WDF147-2 photo
Loading ...
Loading ...
Loading ...
EN
10
2. In all cases, check that the end of the drain hose is securely fixed to prevent the
repulsive force of the water from pushing it out of place.
Warning!
Avoid kinks or restrictions to ensure effective drainage.
Any drain hose extensions must be no more than 1 metre long, must be of the
same diameter and must be free from restrictions of all kinds.
The end of the drain hose must never be submerged in water.
2.5 ELECTRICAL CONNECTION
Before connecting the plug to the power socket ensure that:
1. The electrical system voltage is the same as that stated on the nameplate on
the front of the appliance, in the zone visible when the door is open. The rated
power supply and the fuses required are specified on the nameplate.
2. The meter, safety breakers, power supply line and power socket are rated to
withstand the maximum load required, stated on the nameplate.
3. The power supply socket and the plug fitted to the appliance are compatible
without the use of reductions, multiple sockets, adapters and extension leads
which might cause overheating or scorching.
If the power supply socket is not compatible with the plug supplied, replace the
socket with one of the appropriate type.
Warning
The power plug must be accessible after the appliance has been installed.
It is absolutely essential to connect the appliance to earth. Connect the plug
to a socket with an earth connection in good working order.
The manufacturer declines all liability for direct or indirect injury or damage de-
riving from a non-existent or defective earth connection. Correct electrical con-
nection guarantees conditions of maximum safety.
This appliance is compliant with the requirements of EEC directive 89/336 of
3.5.89 (including the amendment directive 92/31/EEC) concerning the elimination
of radio-frequency disturbance.
If the power supply lead is damaged, it must only be replaced with an original
spare, available from the After-Sales Service.
Do not connection/disconnect the power supply plug from the socket with
wet hands
Only disconnect the power supply plug from the socket by taking hold of
the plug itself, never by pulling on the lead.
Loading ...
Loading ...
Loading ...