Loading ...
Loading ...
Loading ...
6
• Make sure that the power cable is neither dirty, loose, nor broken.
• Never touch, operate, or repair the air conditioner with wet hands.
• Do not place any objects on the power cable.
• Do not place a heater or other heating appliances near the power cable.
• Do not modify or extend the power cable. Scratches or peeling insulation on the
power cables may result in fire or electric shock, and should be replaced.
• Cut off the power supply immediately in the event of a blackout or a thunderstorm.
• Take care to ensure that power cable could not be pulled out or damaged during
operation.
• Do not touch refrigerant pipe, water pipe and any internal parts while the unit is
operating or immediately after operation.
Maintenance
• Before cleaning or performing maintenance, disconnect the power supply and
wait until the fan stops.
• Do not clean the appliance by spraying water directly onto the product.
Technical Safety
• Installation or repairs made by unauthorized persons can pose hazards to you
and others.
• Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorizes their competence to handle refrigerants safely in
accordance with an industry recognized assessment specification.
• Servicing shall only be performed as recommended by the equipment
manufacturer. Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person competent in
the use of flammable refrigerants.
• The information contained in the manual is intended for use by a qualified service
technician who is familiar with the safety procedures and equipped with the proper
tools and test instruments.
• Failure to read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
• The appliance shall be installed in accordance with national wiring regulations.
• When the power cord is to be replaced, the replacement work shall be performed
by authorized personnel using only genuine replacement parts.
Loading ...
Loading ...
Loading ...