Loading ...
Loading ...
Loading ...
303
Technical Notes
12
Accessories from Fuji lm
Body caps Body caps
BCP-001: Cover the camera lens mount when no lens is attached.
Shoe-mounted ash unitsShoe-mounted ash units
EF-X500: In addition to manual and TTL fl ash control, this clip-on fl ash unit has a
Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), al-
lowing it to be used at shutter speeds that exceed the fl ash sync speed. Featuring
support for the optional EF-BP1 battery pack and Fujifi lm optical wireless fl ash
control, it can be used as a master or remote fl ash unit for remote wireless fl ash
photography.
EF-BP1: A battery pack for shoe-mounted fl ash units. Takes up to 8 AA batteries.
EF-X8: This compact, clip-on fl ash unit draws power from the camera has a Guide
Number of approximately 8/26 (ISO 100, m/ft.) and can cover the angle of view of
a 16 mm lens (equivalent to 24 mm in 35 mm format).
EF-42: This clip-on fl ash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and
supports manual and TTL fl ash control.
EF-X20: This clip-on fl ash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and
supports manual and TTL fl ash control.
EF-20: This clip-on fl ash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and
supports TTL fl ash control (manual fl ash control is not supported).
Vertical battery gripsVertical battery grips
VG-XT4: See “Vertical battery grips” (P 278).
Grip beltsGrip belts
GB-001: Improves grip. Combine with a hand grip for more secure handling.
Cover kits Cover kits
CVR-XT4: A set of covers for the X-T4. Contains a sync terminal cap, a hot-shoe
cover, and a memory card slot cover, as well as two vertical battery grip connector
covers (one black and one silver).
instax SHARE printersinstax SHARE printers
SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax fi lm.
Loading ...
Loading ...
Loading ...