Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
94
Water supply
Ensure that the connections are tight
and leak-proof.
Risk of damage to the stainless
steel hose.
The water supply from the tap to the
ice cube maker has been interrupted.
Do not bend or damage the stainless
steel hose.
A stopcock with a metric R3/4thread
must be incorporated when connect-
ing to the water supply.
The solenoid valve is located at the
back of the refrigeration appliance at
the bottom. It also has a metric
R3/4connection.
Connect the straight end of the stain-
less steel hose to the stopcock.
The stainless steel hose should be at-
tached to the solenoid valve at the
bottom of the appliance at the back.
Secure the stainless steel hose to the
appliance housing with the retaining
clip.
Slowly open the water supply stop-
cock and check the whole water sys-
tem for leaks.
Connect the refrigeration appliance to
the power supply (see “Electrical
connection”).
Push the refrigeration appliance into
its final position.
After a maximum of 24hours, the first
ice cubes will drop out of the ice-cube
maker and collect in the drawer.
Loading ...
Loading ...
Loading ...