Loading ...
Loading ...
Loading ...
Cleaning and care
48
Carefully remove, the ice-cube
drawer, which will be full of water.
Empty and clean it.
The ice-cube tray cannot be removed
and must be cleaned in situ.
Dry the ice-cube tray with a soft
cloth.
When the ice-cube maker is switched
back on again, the ice-cube tray will
rotate back into the original position.
Cleaning the ice-cube tray
Clean the ice-cube tray:
- Before switching off the ice-cube
maker for a long period of time.
- Regularly, to remove ice and water
residues.
If you have previously selected the
setting “Rinse the ice-cube
maker” (see “Rinsing the ice-cube
maker”), the ice-cube tray will already
be in the cleaning position.
The ice-cube tray cannot be re-
moved and must be cleaned in situ. For
this reason the ice-cube tray must be
set to the cleaning position.
Selecting the cleaning position
The setting can only be selected if the
ice-cube maker is switched on.
Empty the ice-cube drawer.
Touch the settings sensor.
All symbols available for selection ap-
pear in the display and the symbol
flashes.
Touch the buttons for setting the tem-
perature (and) repeatedly until
the ice-cube maker symbol
flashes in the display.
Touch the OK sensor to confirm the
selection.
By touching the and buttons,
you can now select the setting you
want:
0:the ice-cube maker is switched off
1:the ice-cube maker is switched on
2:set the water volume
3:select the ice-cube tray cleaning
position
4:rinse the ice-cube maker
Touch the OK sensor to confirm the
selection.
The selected setting will be applied and
you will hear the ice-cube tray rotate
into an angled position.
Wait until the ice-cube tray has com-
pleted this rotation before continuing.
The ice-cube maker will then switch off.
The symbol for the ice-cube maker
will disappear from the display.
Loading ...
Loading ...
Loading ...