Loading ...
Loading ...
Loading ...
Switching on and off
22
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Removing the protective foil
Carefully peel the protective foil off.
Cleaning the appliance
Please refer to the relevant instruc-
tions in “Cleaning and care”.
Clean the inside of the appliance and
the accessories.
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Every touch of a sensor is confirmed
with an audible tone. This keypad tone
can be switched off (see “Selecting fur-
ther settings” – “Audible tones”).
Switching the appliance on
To enable the temperature to get suf-
ficiently cold inside the appliance, al-
low the appliance to run for a few
hours before placing food in it.
When the appliance is connected to the
electrical supply, the mains connection
symbol will appear in the display
after a short while.
Touch the On/Off control.
The refrigeration appliance will start
cooling. The power connection sym-
bol will go out and the temperature
display will appear.
The temperature display and the alarm
symbol will flash at the same time
until the required temperature is
reached. If the current temperature in-
side the appliance is above 0°C, two
bars will flash in the display.
When the appliance door is opened, the
interior lighting comes on and the LED
lighting becomes brighter until it
reaches its maximum brightness.
Loading ...
Loading ...
Loading ...