Loading ...
Loading ...
Loading ...
13
How to Wake the Machine
Make sure the control knob is in the neutral position. Press the Power button to wake
the machine.
Turn On/Off Sounds
Press and hold the Single and Grind buttons together for 3 seconds to turn off all
sounds.
Factory Reset
Press and hold the Grind, Single and Double buttons together for 3 seconds to turn
reset all programmable settings back to the factory settings.
Overpressure
This means the coee grounds are too small, there are too many grounds, or the
grounds are packed too tight in the portafilter. Overpressure is indicated by all functional
button lights FLASHING WHITE. To fix, dispose of grounds, and try again by increasing
the ground size, decreasing the dosage, or tamping the grounds with less pressure.
Overpressure may occur more often at first, especially with finer grind sizes.
Portafilter and Filters
To remove filters from the portafilter, use the
flat end of the cleaning brush to lift the filter
out of the portafilter.
If there is too much resistance while
inserting the portafilter into the group-head,
there are too many coee grounds in the
filter. Remove some grounds and try again.
Ground puck may be dicult to remove from
the filter. Use an utensil to remove grounds.
Excessive impact to portafilter to remove
grounds may result in damage.
Single and Double Layer Filters
• Double Layer filters provide more
consistent results between varying grind
sizes and bean types and generally result
in more crema.
• Single Layer filters are more sensitive to
grind size adjustments and bean types but allow for more adjustability.
SmartHQ App
Use the SmartHQ app to view and change espresso machine settings.
See page 20 for how to connect your machine to WiFi.
Using Your Espresso Machine
Single
Layer
Single shot
Filter
Single
Layer
Double
shot Filter
Double
Layer
Single shot
Filter
Double
Layer
Double
shot Filter
Loading ...
Loading ...
Loading ...