Loading ...
Loading ...
Loading ...
EN
40
Operation
www.bora.com
7 Operation
Observe all safety and warning information during
operation (see Safety chapter).
INFO Do not operate the integrated cooktop extractor
with other cooktops.
INFO The cooktop should only be operated when the
filter replacement cover, stainless steel grease
filter and air inlet nozzle are installed (as well as
the activated charcoal filter in the recirculation
model).
7.1 General operating instructions
The cooktop extractor and cooktops are operated via
a central operating panel. The operating panel is fitted
with electronic sensor buttons and display panels. The
sensor buttons respond to finger contact (see Appliance
description chapter).
You control the appliance by tapping the corresponding
sensor button with your finger (touch control) or making a
swiping movement with your finger (slider control).
7.2 Touch control
INFO The system recognises different touch commands.
It differentiates between a brief touch (tap), a
prolonged touch (long press) and vertical sliding
movements with your finger (swiping).
Touch commands applicable to Time (contact)
Tap Buttons + slider 0.3 s
Long press Buttons + slider 1 – 8 s
Swipe Slider 0.1 – 8 s
Tab. 7.1 Touch control
7.3 Operating the system
7.3.1 Switching on
Long press on the power button
The switch-on animation is displayed in the slider.
If start-up is successful, the standard display will
appear in the operating panel.
Fig. 7.1 Standard display after switching on
INFO If the childproofing feature is active, the lock
button will light up after system start-up. The
standard display will only appear once it has been
unlocked (see Childproofing feature).
7.3.2 Switching off
Long press on the power button
.
The switching-off animation is displayed.
If the cooktop extractor has been on:
The fan symbol will light up and the automatic after-run
function will start (the automatic after-run animation is
displayed).
The display goes out when the after-run time has
lapsed.
If the cooktop has been on:
The residual heat indicator
H
is displayed for previously
active and still hot cooking zones.
The display goes out when no more residual heat is
present.
7.3.3 Control lock
Activating the control lock
Long press on the lock button .
The operating panel display is dimmed.
The lock button lights up.
All functions are deactivated except for the power
button and the lock button.
INFO If the system is switched off when the control lock
is active, the control lock will no longer be active
next time the system is switched on.
Deactivating the control lock
Long press on the lock button .
The standard display lights up and the operating panel
is reactivated.
The lock button is dimmed.
Loading ...
Loading ...
Loading ...