Loading ...
Loading ...
Loading ...
EN
34
Installation
www.bora.com
[1] Cooktop
[2] Inlet opening
[3] Air inlet nozzle
[4] Stainless steel grease filter
[5] Worktop cut-out
[6] Adhesive tape
Before inserting the cooktop, remove the air inlet
nozzle [3] and the stainless steel grease filter [4].
Remove the protective film from the adhesive tape [6]
on the front of the telescopic pull-out.
Use the inlet opening [2] as a handle during insertion.
Keep the cooktop [1] straight as you lift it into the
worktop cut-out [5]
Insert the cooktop [1] into the centre of the worktop
cut-out [5].
Precisely align the cooktop.
Information regarding flush installation:
Make sure that the sealing tape of the cooktop is well
sealed all the way round.
Information regarding surface mounting:
Make sure that the sealing tape for the cooktop is flat
against the worktop.
Height adjustment plates for flush
installation(optional)
1
2
Fig. 6.34 Height adjustment plates
[1] Cooktop
[2] Height adjustment plate
1 2
Fig. 6.35 Height adjustment plates
[1] Sealing tape
[2] Optional height adjustment plates
The height adjustment plates are self-adhesive to
prevent slipping during installation.
34 1
2
Fig. 6.32 Extending the telescopic pull-out.
[1] Telescopic pull-out
[2] Telescopic pull-out adhesive tape
[3] Telescopic pull-out extension PULBTA
[4] Adhesive tape for telescopic pull-out extension PULBTA
Remove the protective film from the adhesive tape [2]
on the front of the telescopic pull-out [1].
Attach the extension PULBTA [3] (available as an
accessory including screws for attachment) to the
telescopic pull-out [1].
Remove the protective film from the adhesive tape [4]
on the front of the extension PULBTA [3].
6.7.3 Inserting the cooktop
54321
6
Fig. 6.33 Positioning the cooktop in the centre
Loading ...
Loading ...
Loading ...