Loading ...
Loading ...
Loading ...
49-6000065 15
INSTALLATION INSTRUCTIONS
E. OPTIONAL REMOTE LOCATION
INSTALLATION
(requires additional part)
1. Turn off the cold water supply.
2. Complying with plumbing codes, install a fitting
on the cold water pipe to adapt 1/4” OD tubing.
A typical connection is shown in illustration
below. Make sure a water supply valve is used.
,IWKH52XQLWLVWREHLQVWDOOHGPRUHWKDQIHHW
from the valve, replace the yellow banded inlet
tubing with a longer length of GE Appliances
1/4” tubing. A 33-foot length of 1/4” tubing
is available through GE Appliances Parts
and Services at , part number
WS07X10018. DO NOT SUBSTITUTE TUBING
OF UNKNOWN QUALITY.
,IWKH52XQLWLVWREHLQVWDOOHGPRUHWKDQIHHW
from the faucet, replace the blue banded outlet
tubing with a longer length of GE Appliances
3/8” tubing. A 33-foot length is available
through GE Appliances Parts and Services at
SDUWQXPEHU:6;6HH
Faucet Mounting Installation on page 17 for
more details. DO NOT SUBSTITUTE TUBING
OF UNKNOWN QUALITY.
If you are using copper tubing, DO NOT connect
it directly onto the RO unit. Purchase a connector
and use a short length of the yellow banded tubing
provided to make final connection to RO. Do not use
copper tubing to attach to icemaker or faucet.
D. OPTIONAL RIGID PIPE
INSTALLATION
For installation with rigid pipe between supply valve
and sink faucet.
Option 1
1. Remove pipe from supply valve and sink faucet.
2. Obtain flexible pipe sized to your plumbing.
3. Install flexible pipe.
4. GO back to B. OPTIONAL INSTALLATION 1
section, step 4.
Option 2
1. Obtain compression fittings to fit rigid pipe.
2. Obtain any other fittings required to connect
compression fittings to adapter.
NOTE: Adapter has 1/2” and 3/8” internal and
external threads.
3. Remove pipe from supply valve.
4. Cut pipe to fit length of assembled fittings and
adapter.
5. Install compression fitting to pipe.
*2EDFNWR%237,21$/,167$//$7,21
section, step 4.
NOTE: Above described materials are not included
with the product.
Cold
water
pipe
Insert (not included)
Ferrule
Water supply valve
To RO
Preferred water supply connection
(using compression fitting)
1/4” (yellow banded)
tubing to inlet
Feed Water Supply (Cont.)
Installation Instructions
Loading ...
Loading ...
Loading ...