Loading ...
Loading ...
Loading ...
49-6000065 11
INSTALLATION INSTRUCTIONS
THINGS TO CHECK BEFORE BEGINNING INSTALLATION
FEED WATER
The water supply to the undercounter Reverse
Osmosis system must have the qualities listed in
the specifications. Municipal water supplies most
often will have these qualities. Well water may need
conditioning—have the water tested by a water
analysis laboratory and get their recommendations
for treatment.
IMPORTANT — For water with a hardness
JUHDWHUWKDQJUDLQVDWS+WKHXVHRI
a softener is recommended. Failure to install a
softener will reduce the life of the Reverse Osmosis
cartridge.
FILTRATION DRAIN CONNECTION
A suitable drain point and air gap (check your state
and/or local codes) are needed for reject water
from the Reverse Osmosis membrane cartridge.
BASEMENT INSTALLATION
If installing in a basement, leave enough tubing in
place during installation to be able to move unit
to floor for ease at servicing and making filter/
membrane changes. Additional tubing and fittings
required.
NOTE: 6HHSDUWVOLVWRQSDJHIRURSWLRQDOSDUWV
that may be required for a basement installation.
RO FAUCET
The RO product water faucet installs on the sink
or on the countertop next to the sink. Often, it is
installed in an existing sink spray attachment hole or
a hole may be drilled. Space is required underneath
for tubing to and from the faucet, and for securing
the faucet in place. All faucet connections are done
on or above the sink or countertop.
Sink
p-trap
Hot
Cold
Disposer
1/4” drain
tube (black)
3/8” outlet tube (blue banded)
1/4” inlet tube
(yellow banded)
Reverse osmosis system
3/8” storage
tank tube
(red banded)
11” dia. 10-1/2”
15”
11”
7”
3/8” drain tube (black)
RO product water faucet mounted through sink or countertop
Feed water adapter
Prefilter Postfilter
Membrane
1/4” yellow
banded inlet
from supply
valve
1/4” black
tube to
faucet
3/8” red
banded tube to
storage tank
3/8” blue
banded
tube to
faucet
TUBING/FILTER DETAIL
Installation Instructions
Loading ...
Loading ...
Loading ...