Denali Aire 2DANC24K 23,500 BTU 230-Volt ROOM AIR CONDITIONER

User Manual - Page 10

For 2DANC24K. Also, The document are for others Denali Aire models: 2DANC18K, 2DANC24K 2, DANCH18K, 2DANCH24K

PDF File Manual, 18 pages, Read Online | Download pdf file

2DANC24K photo
Loading ...
Loading ...
Loading ...
SAFETY & PRECAUTIONS
CONTINUEDCONTINUED
10
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT � Save these instructions for local inspector’s use.
IMPORTANT – Observe all governing codes and ordinances.
Note to Installer – Be sure to leave these instructions with the Consumer.
Note to Consumer – Keep these instructions for future reference.
Skill Level – Installation of this appliance requires basic mechanical skills.
Completion Time – Approximately 1 hour.
We recommend that two people install this product.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered under the Warranty.
You MUST use all supplied parts and use proper installation procedures as described in these
instructions when installing this air conditioner.
ELECTRICAL REQUIREMENTS
These models require:
230/208-volt AC, protected with a time-delay fuse or circuit breaker. These models
should be installed on their own single branch circuit for best performance and
to prevent overloading house or apartment wiring circuits, which could cause a
possible re hazard from overheating wires.
The 3-prong grounding plug minimizes the possibility of electric shock hazard.
If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility
to have it replaced with a properly grounded 3-prong wall outlet.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
Do not change the plug on the power cord of this air conditioner.
Aluminum house wiring may create issues - consult a qualied electrician.
The power cord includes a current interrupter device. A test and reset button are provided on the plug case.
The device should be tested on a periodic basis by rst pressing the TEST button and then the RESET
button while plugged into the outlet. If the TEST button does not trip or if the RESET button will not stay
engaged, discontinue use of the air conditioner and contact a qualied service technician.
CAUTION
2DANC24K
2DANCH18K
2DANCH24K
2DANC18K
Loading ...
Loading ...
Loading ...