Loading ...
Loading ...
Loading ...
page 8
WARNING: To reduce the risk of serious bodily
injury, DO NOT use power tools to assemble the
blades. If screws are overtightened, blades may
crack and break.
Time Saver: Fiber washers for blade screws can be
set on each blade screw prior to installing blades.
Locate 9 blade attachment screws (and fiber
washers) in hardware pack. Hold blade arm up to
blade and align holes. Insert 3 blade attachment
screws (along with fiber washers) with fingers first
and then tighten screws securely with a Phillips
screwdriver. [Refer to diagram 1.] Repeat for the
remaining blades.
Locate blade arm screws and lock washers in
hardware pack. Align blade arm holes with holes
in outside wall of motor plate and attach blade
assembly with blade arm screws and lock washers.
[Refer to diagram 2.] Before securing screws
permanently, repeat with remaining blade arms.
Once all 3 blade arms have been attached, securely
tighten all screws.
Remove every other motor screw (on underside of
motor housing) and partially loosen the remaining
5 screws. Align slotted holes in motor plate with
loosened screws in motor. Twist motor plate to lock.
Re-insert screws that were previously removed.
Tighten all 10 screws to secure motor plate. [Refer
to diagram 3.]
WARNING: Failure to secure motor plate correctly
may result in fan wobble or serious injury.
NOTE: Tighten motor screws twice a year.
8. Blade Assembly.
9. Light Kit Assembly.
Remove 1 screw from fitter plate on underside of
motor housing and partially loosen the other
2 screws.
Connect BLACK (or BLUE) wire from motor
housing to BLACK wire from light kit fitter. Connect
WHITE wire from motor housing to WHITE wire
from light kit fitter. Be sure that molex connections
snap together completely.
Carefully arrange wiring within light kit fitter. Align
slotted holes in the light kit fitter with loosened
screws in fitter plate. Twist light kit fitter to lock.
Re-insert screw that was previously removed.
Tighten all 3 screws to secure light kit fitter.
blade assembly
blade arm screws
and lock washers
motor plate
motor
housing
motor screws
and lock washers
fitter plate
light
kit
fitter
molex
connections
diagram 2
motor
plate
motor screws
and lock washers
motor
housing
blade attachment
screws and fiber washers
blade
blade arm
diagram 1
diagram 3
Loading ...
Loading ...
Loading ...