Craftmade LO52BNK3 Loris 52" Brushed Polished Nickel Indoor Ceiling Fan

User Manual - Page 11

For LO52BNK3.

PDF File Manual, 24 pages, Read Online | Download pdf file

LO52BNK3 photo
Loading ...
Loading ...
Loading ...
page 11
It is recommended that you test fan before finalizing
installation. Restore power from circuit box and light
switch (if applicable). Test wall control (optional
installation) by locating ON/OFF slider switch on wall
control, then set to the ON position. Test light and
dimmer function and then test fan speeds. Next,
locate handheld remote control. Test the light
ON/OFF function by pressing the L1 button; test the
dimmer function by pressing the L1 button and
holding it down for up to 5 seconds. Test fan speeds
with the different fan speed buttons. If the wall and/or
handheld remote control operates all of the functions
of the fan, battery (batteries) has (have) been installed
correctly. If the wall and/or handheld remote control
do (does) not operate all of the fan/light functions,
refer to "Troubleshooting" section to solve any issues
before contacting Customer Service.
Turn fan completely off before moving the reverse
switch (located on top of motor housing). Set reverse
switch to recirculate air depending on the season:
- LEFT position in summer (diagram 1)
- RIGHT position in winter (diagram 2)
A ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat setting
in winter without feeling a difference in your comfort.
Important: Reverse switch must be set either
completely LEFT or completely RIGHT for fan to
function. If the reverse switch is set in the middle
position (diagram 3), fan will not operate.
NOTE: If the wall control/handheld remote control
interferes with other appliances, turn power off first
and then go back to the instructions in Section 11
(page 10).
13. Testing Your Fan.
12. Remote Control Operation.
ON/OFF slider switch - turns wall control ON or OFF
(ON/OFF slider switch not
functional on handheld remote)
HIGH button - turns fan to HIGH speed
MED button - turns fan to MEDIUM speed
LOW button - turns fan to LOW speed
OFF button - turns fan OFF
L1 button - turns light kit ON/OFF when pressed once;
dims light kit when pressed and held down
wall control
handheld
remote control
11
-
11
-
diagram 1
diagram 2
diagram 3
motor
housing
reverse
switch
Loading ...
Loading ...
Loading ...