Loading ...
Loading ...
Loading ...
18
Essential information
Before thorough cleaning, turn o the circuit
breaker. Allow the range to cool.
After cleaning remember to switch on the circuit
breaker before using the range.
NEVER use paint solvents, caustic cleaners,
biological powders, bleach, chlorine based bleach
cleaners, coarse abrasives or salt.
DO NOT mix dierent cleaning products – they may
react together with hazardous results.
Recommended cleaning materials are shown in Table 5.1 on
page 20.
Cooktop
Daily care
First of all make sure that all heat indicator lights are o and
that the cooking surface is cool. Apply a small dab of Ceramic
Hob Cleaner
(SAG-W2022) in the centre of each area to be
cleaned. Dampen a clean paper towel and work the cream
onto the cooking surface. As a nal step, wipe the cooking
surface with a clean, dry paper towel.
Enamel Rubber Eraser
(SAG-W1843) removes scu marks on
ceramic, without scratching, providing easy cleaning for daily
use.
Cleaning spills
For spills and boil-overs that occur while cooking, turn the
unit o and wipe the area surrounding the hot zone with a
clean paper towel. If a spill (other than a sugary substance) is
on the hot zone, do not clean until the unit has completely
cooled down, and then follow the instructions below
(‘Cleaning Burned-on Spills’).
If you accidentally melt anything on the surface, or if you spill
foods with a high sugar content (preserves, tomato sauce,
fruit juice, etc.), remove the spill IMMEDIATELY with a single-
edged razor scraper (not included), while the unit is still hot.
IMPORTANT: Use an oven glove to protect your hand
from potential burns.
Scrape the major spill or melted material from the cooking
zone and push into a cold area. Then, turn the unit ‘OFF’ and
allow it to cool before cleaning further. After the cooking
surface cools down and the heat indicator lights go o, follow
the ‘Daily Care’ procedure outlined above.
Cleaning burned-on spills
Make sure that the heat indicator lights are o and that the
cooktop is cool. Remove the excess burned-on substance
with a single-edged razor scraper (not included). Hold the
scraper at an angle of about 30° to the surface and then
scrape o the burned-on matter (Fig. 5.1).
Top Plate Scraper Tool: (
SAG-W2084) Its stainless steel body
is easy to clean and the built in blade protector ensures the
blade can be safely withdrawn when the scraper is not in use.
5. Cleaning your range
ArtNo.312-0010 Cleaning; scraping the ceramic hob
Fig. 5.1
Loading ...
Loading ...
Loading ...