Loading ...
Loading ...
Loading ...
6
Part Qty Example
Hood (models
vary in size/
appearance)
1
Grease channel 1
Baffle-style filter
w/knobs (ready-
to-assemble kit)
48” (4)
36” (3)
30” (2)
Holding brackets,
hardware
2
Dimmable LED
light bulbs
48” (4)
36” (3)
30” (2)
Light-
replacement tool
1
Product literature
(Installation, Use-
and-Care guides)
2
Dacor cleaning
cream
1
STAINLESS
STEEL
CLEANER
Preparation and Setup
Parts List
Have these tools and hardware within reach before you
start the installation.
Blower Rotation (option)
Phillips screwdriver 5/16” Nut driver
Dual-to-Single Vent Transition Kit (option)
Dacor Kit #AHT10 Sheet-metal screws
10” Ducts, ducting material Foil tape
Drill, bits
Needed Tools/Hardware
Hood Installation
Phillips screwdriver Level
Flathead screwdriver Junction box
Pencil/marking tool Jigsaw
Wire connector caps 8” Ducting
Wire stripper Foil tape
Drill, bits Sheet-metal screws
WARNING
Make sure a licensed electrician installs the electrical
service to the range hood.
• The owner is responsible for verifying that all electrical
requirements are met by the qualified electrician servicing
this appliance.
• The electrical installation (incl. the minimum supply-
wire size and grounding) must comply with the National
Electric code ANSI/NFPA (or latest revision), local
codes, and ordinances. Obtain a copy of the ANSI/NFPA
standard from:
National Fire Protection Association
1 Batterymarch Park
Quincy, Massachusetts 02269-9101
• The ground terminal on the hood must be connected
to a grounded, metallic, permanent wiring system, or a
grounding conductor installed by a licensed electrician.
• Do not ground the appliance or appliance wiring to a gas
pipeline or to the neutral (white) power supply wire.
• Do not install a fuse in the neutral or ground circuit.
• Connect the hood directly to an electrical junction
box. Hard-wire the hood according to local code directly
to a dedicated three-wire grounded, single phase circuit
rated at 120 Vac 60 Hz, 15 Amp.
Meeting Electrical Codes
Loading ...
Loading ...
Loading ...