Loading ...
Loading ...
Loading ...
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM
17
Electrical Connection
Four Conductor Wire Connection to Range
1. Remove the screws at the lower end of the rear access cover and take it down to
expose range terminal connecon block.
2. Remove the screws to lose the cable clamp and pass through the four conductor wire
from the boom of the range.
3. Loose the screws on the terminal block and connect the wire to terminals, aer then,
ghten the screws of cable clamp and terminal block, please make sure that match the
wire and terminals by color.
4. Put back the terminal cover and ghten the screws.
Electrical Shock Hazard
•Electrical ground is required on this appliance.
•Do not connect to the electrical supply unl appliance is permanently grounded.
•Disconnect power to the circuit breaker or fuse box before making the electrical
connecon.
• This appliance must be connected to a grounded, metallic, permanent wiring
system, or a grounding connector should be connected to the grounding terminal or
wire lead on the appliance. Failure to do any of the above could result in a fire,
personal injury or electrical shock.
Loading ...
Loading ...
Loading ...