Loading ...
Loading ...
Loading ...
FreshStart Fuel Cap
Adding fue! preserver helps keepfuei fresh and carburetors
clean for easier starting, ati season iong. This new fue! cap
automatically drips concentratedfuel preserver into your fuel
tank.
,, .DANGER
_///,,av/_ contact to eyes, skin or clothing. DONOTtake
internaliy. Avoid breathing the mist or vapor.
Overexposureto eyesor skin can causeirritation.
Keepstabiiizer out of the reach of children.
Fuel stabilizer is a hazardous chemical.**
If SWALLOWED,callphysicianimmediately.
h_the caseof anemergency,contacta physicianimmediately
andcall1-800-424-9300for materialsafetyirfforrnation.
*Fuel stabilizer contains: 2,6-di-tret-butylphenol (128-39-2) and aliphatic petroleum
distillate (64742-47-8),
1. Placecartridge into fuel cap.
/
, jl
/
2. Pushto <<snap"cartridge into place.
3. Removetab to expose membrane.
IMPORTANT:DO NOT removethe silver foil seal oll the
opposite side.
4. Reinstall fuei cap on fuel tank.
Periodicaliycheck the cartridge to ensure there is still
fuel stabilizer inside. If it is empty, remove cartridge and
replace=
tti!lh llllitude
At altitudes over 5,000 feet (1524 meters), a minimum
85 octane / 85 AKi (89 RON)gasoiine is acceptable. To
remain emissions compiiant, high aititude adjustment is
required. Operationwithout this adjustment win cause
decreasedperformance, increased fuei consumption, and
increasedemissions. See a qualified Sears deaier for high
altitude adjustment information. Operation of tile engine at
altitudes below 2,500 feet (762 meters) with the high altitude
kit is not recommended.
Cennect Hose and Water $upply te Pump
NOTE:Removeand discardthe shipping caps from the
pump's high pressure outlet and water inlet before attaching
hoses.
1. Uncoii higil pressure hose and attach one end of hose to
base of spray gun. Tighten by hand.
!tYAilIIIItll
igh pressure stream
ent produces can cut through skin and its
ying tissues, ieadingto serious injury and
le amputation.
NEVERconnecthigh pressurehoseto nozzleextension.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
Alwaysbecertainspraygun,nozzlesandaccessoriesare
correctlyattached.
.
Attach other end of high pressure hose to high pressure
outlet on pump, Tighten by hand,
Loading ...
Loading ...
Loading ...