Loading ...
Loading ...
Loading ...
HOWTO USEYOURPRESSUREWASHER
If you haveany problems operating your pressure washer,
please call the pressure washer helpline at 1-800-222-3136.
Pressure Washer Lecatien
PressureWasherClearance
WARNING
Exhaustheat/gases can ignite combustibbs,
structures or damage fuei tank causing a fire.
o Keepat least5ft. (152crn)clearanceon all sidesof pressure
washerincludh_goverhead.
Placepressure washer outdoors in an areathat wiii not
accumulate deadly exhaust gas. DO NOTplace pressure
washer where exhaust gas (A) could accumulateand enter
inside or be drawn into a potentiaily occupied building.
Ensureexhaust gas is kept awayfrom any windows, doors,
ventiiation intakes, or other openings that can aliow exhaust
gas to coIiect in a confined area. Prevaiiingwinds and air
currents should be taken into consideration when positioning
_ressurewasher.
WARNING
Running engine gives off carbon monoxide, an
odorless, colorless, poison gas.
Breathingcarbon monoxide can causeheadache,
fatigue, dizziness, vomiting, confusion, seizures,
nausea,fainting or death.
° OperatepressurewasherONLYoutdoors.
o Keepexhaustgasfrornenteringaconfinedareathrough
windows,doors,ventilationintakes,or otheropenings.
* DONOTstar or runengineindoorsor in an enclosedarea,
evenif windowsanddoorsare open.
To Start Your Pressure Washer
To start your engine=poweredpressurewasher for the first
time, foiiow these instructions step=by=step.This information
also applies wheneveryou start the engine after you have let
the pressure washer sit idle for at bast a day.
1. Placepressure washer near an outside water source
capable of supplying water at a flow rate greater than
3.8 galions per minute and no iess than 20 PSi at
pressurewasher end of garden hose.
2. Checkthat high pressure hose is tightly connected to
spray gun and pump. SeeAssembyfor illustrations.
3. Makesure unit is in a ievel position.
4. Connectgarden hose to water inlet on pressure washer
pump.
5. Turn ONthe water, press red button on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
i OTlCE
DO NOTrun the pump without the water supply connected
and turned on.
Damageto equipmentresultingfrom failureto followthis
instructionwill void warranty
6. Attach nozzleextension to spray gun. Tighten by hand.
ChooseProjectProTM nozzleyou want to use, puff back
on coliar of nozzleextension, insert nozzle and reiease
coiiar. Tug on nozzleto makesure it is securely in place.
SeeHow to UseProjectProTMIVozz/eSystem.
8. Rotate fuel shut-off valveto "On" position (A) (fully
counter=clockwise).
11
Loading ...
Loading ...
Loading ...