Loading ...
Loading ...
Loading ...
WARNING
Contact with muffler area can result in serious
burns.
Exhaustheat/gases can ignite combustibles,
structures or damage fuel tank causing a fire.
* DONOTtouch hot partsandAVOIDhot exhaustgases.
* Allowequipmentto cool beforetouching.
o Keepat least5feet (152crn) of clearanceonall sidesof
pressurewasherincludingoverhead.
, Codeof FederalRegulation(CFR)Title36 Parks,Forests,and
PublicPropertyrequireequipmentpoweredby aninternal
combustionengineto haveasparkarrester,rnaintainedin
effectiveworkingorder,complyingto USDAForestservice
standard5!00-1C or laterrevision.Itsthe Stateof Californiaa
sparkarresteris requiredundersection4442of the California
Publicresourcescode.Otherstatesrnayhavesimilarlaws.
NOTE:Always keep the throttle lever in the "Fast" position
when operating the pressure washer.
How to Stop Your Pressure Washer
1. Rebase spray gun trigger and let engine idle for two
minutes.
2. Move throttie to SLOW position, then STOPposition.
WARNING
Backfire,fire or engine damagecould occur.
* DONOTstopenginebymovingchokeleverto "Choke"position.
3. ALWAYSpoint spray gun in a safe direction, press red
button and squeezespray gun trigger to releaseretained
high water pressure.
iMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
_ nderiying tissues, ieadingto serious injury and
)ossibteamputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keephigh pressurehoseconnectedto purnpandspray'gun
whilesystemis pressurized.
o ALWAYSpointspray'gunin safedirection,pressredbutton
andsqueezespraygun trigger,to rebasehigh pressure,every'
time youstopengine.
How te Use Accessory Tray
The unit is equipped with an accessorytray with piacesto
store your ProjectProTM nozzles, HydroFoamTM iauncher, spray
gun and nozzleextension. There is aiso a hook at the front of
the accessorytray to hoid your high pressure hose. Identify
ali accessories with the iiiustration on page6.
NOTE:The extra hob in the tray is for storing a utiiity brush.
The extra clip in the tray is for storing a turbo nozzie. The
brush and turbo nozzleare NOTincluded with your pressure
washer. You can buy these items as optional accessories.
1. Mace nozzle extension througil hob on accessory tray,
as shown.
.
3.
4.
.
Placespray gun through hole on accessory tray on right
side of unit.
Insert muiti-coiored ProjectProTM nozzlesin spaces
provided in accessory tray.
Insert HydroFoamTM iauncher in spaceprovided in
accessory tray next to the multi-colored ProjectProTM
nozztes.
Hang higI1pressure hose on hook attachedto accessory
tray on front of tray as shown.
Hew te Use PrejectPre TM Nozzle System
The quick-connect on the nozzleextension aliows you to
switch between three different ProjectProTM system nozzies.
ProjectProTM nozzlescan be changed whiie pressure washer
is running once spray gun trigger Iock is engaged. The
ProjectProTM nozzlesvary the pressure and spray pattern as
shown.
High Pressure
Delicate General Max
40° Yellow 15° Orange 0° Red
2550 PSi 2800 PSi 3100 PSi
2.8 GPM 2.7 GPM 2.3 GPM
13
Loading ...
Loading ...
Loading ...