Loading ...
Loading ...
Loading ...
MAINTENANCE INSTRUCTIONS
Securestationaryidlerwith mountingbolt.
Place sparkplug wire onto spark plug.
Setpark brake.
Start Engine.
Visuallyinspecttractiondrive beltfor movement.
When properlyadjusted,the tractiondrivebelt shouldnot
have any movement or rotationwith the engine running
and park brake engaged.
Shouldmovement be present,readjusttractiondrive belt
to releasebeittension asdescribedinpreviousinstructions.
Movetractorto a firm, levelsurface. /
Turn engine"OFF'.
Raisehood,remove sparkplug wirefrom sparkplug and
securewire away fromplug.
Movebladeengagement leverdownto"OFF".See Figure ._._:
60. -::
E
ENGAGEMENT
TO "OFF"
Lower deckto lowest cutting position
Checkfrontto rear level.
If deck front to rear level is not correct,
thiscouldcause blade beltproblems.
30" & 33" DECKS
Measure length of blade cable extensionspring. See
Figure61.
Moveblade engagement lever to "ON".
Measure blade cable extension spring.Spring should
extend1"+_1/8"for properbelttension.See Figure61.
EXTENSION SPRING
FIGURE 60
FIGURE 61
3O
Loading ...
Loading ...
Loading ...