Loading ...
Loading ...
Loading ...
MAINTENANCE INSTRUCTIONS
To adjust tension, remove extension rod mountingbolt
and nut. See Figure62.
Move extension rodto next hole towards rear of deck and
securewith mountingbolt and nut. MOUNTING-
NUT & BOLT
Measure extension spring with blade engagement lever in
the "ON" and "OFF" positions. See Figure 61. Continue
adjustment until tension is correct.
I
-_LEAST TENSION/d
• _L / MOSTTENSlON
"-_ //
FIGURE 62
NOTE:
Before adjusting deck, bring tire pressureto properpsi.
Front12 psi, Rear 10 psi.
SIDE TO SIDE LEVEL
Movetractorto a firm, level surface.
Turn engine "OFF".
Raisehood, remove spark plugwire from spark plug and
securewire away from plug.
Move blade engagement lever to "OFF".
Place a piece of angle iron under center rear of deck.
SECTOR
PLATE
__ REMOV_ _
Remove hair pins and washers securing rear of deck to
sector plates. See Figure 65.
FIGURE 65
31
Loading ...
Loading ...
Loading ...