Loading ...
Loading ...
dication.Youmust be in goodphysical
cor_rdion.andmentallyalerL ffyou have
anyconcFdonthat mightbe aggravated
by strenuouswork,checkwith doctor
beforeoperating.
Watch what you are doing. Use com-
monsense. _ ::....
• Do notstart cuttinguntilyou have a
" clear work area, secure footing, and
especiallyifyou are felling a tree, a
retreatpath. Keep work area clean.
Cluttered areas invite injudas.
OPERATE YOUR SAW SAFELY
• Do notoperate with one hand. Sed-
ous injuryto the operator, helpers, or
bystanders may resultfrom one-
handed operation.A chain saw is in-
tended fortwo-handed use.
• Do not operate saw from a ladder or
in a tree.
• Make sure the chain will not make
contact with any object while starting
the saw. Never start the saw when the
guide bar is ina cut•
• Don'tforce chain saw. It willdo the job
better and safer at the rate for whichit
was intended.
• Do notput pressure onthe saw, es-
peciallyat the end ofthe cut. Doing
so can causeyou to losecontrol
when the cut is completed.
• Stopthe saw before setting it down.
Hand carry sew only when motor is
stopped. Carrythe chainsaw by the
fronthandlewiththe saw sty, fm-
gorofftbeswitck _le guidebar and
saw chainto therear.
• Use the righttool, cut wood only.
Don'tuse chain saw for purpose not
intended;for example, don't usa
chain saw forcuttingplastic, masonry,
non-woodbuildin_ rnstedals.
• Usa extreme caution when cuffing
• small's_ brush and saplings be-
cause the tender matedal m.aycatch
the saw chainand be wh-ipp_l toward
- you or pullyou offbalance.
• When cuttinga limbthat is under ten-
sion be alertfor epnng back so you
willnot be struckwhen the tension in
the wood fibers is released.
MAINTAIN YOUR SAW IN GOOD
WORKING ORDER
• Have all chain saw service performed
_ya Sears Service Center except the
listedin the maintenance sac-
tionofthis manual. •
• Ma_e-_ef_dn saw chain stops moving
when trigger switchis released.
i Keep the handles dry and clean and
free from oiland grease.
Keep oilcap andfastenere securely
tightened. •
• N-onco ormingre _camentcorrco-
nantsortbe removalof safetydevices
may osuse damage totha unitand
_sta_eminjuw tothe operatoror by-
•Usa onlyCraftsmanaccasso-
desand replacementparis as r_om-
mended. Never modi_,yoursaw.
• Maintain chain saw withcare.
i Keep unitsharp and clean forbetterand safer performance.
Follow instructionsfor lubricatingand
changingaccessodee.
• Unplugthe chainsaw fromthe power
source when not in use, before servic-
ing, and when changing accessories
and attachments, such as saw chain
and guard,
• Check for damaged parts. Before fur-
ther use of the chain saw, a guard or
other part that is damaged should be
carefully checked to determine that it
will operate properly and perform its in-
tended function. Check for alignment of
moving parts, binding of moving paris,
breakage of pads, mounting and any
other conditions that may affect its op-
eration. A guard or other part that is
damaged should be properly repaired
or replaced by a Sears Service Center
unless otherwise indicated elsewhere in
the operator's manual.
• Do not operate a chain saw that is
damaged, improperly adjusted, or is
not completely and securely as-
sembled. Inspect chain saw cords pe-
riodically, and if damaged have re-
paired by a Sears Service Center.
• When notin use, chain saws should
be stored in a dry,high or locked-up
place out of the reach ofchildren.
• When storingsaw, unplugand use a
bar sheath or carrying case. Store idle
chain saw.
ELECTRICAL SAFETY
• Use a voltagesupply as shownonunit
• Avoid dangerousenvironments.Don't
usaappliances indamp orwet loca-
tions. Don't use in rain.
• Avoid dengemus situations.Do not
use in the presence of flammable liq-
uidsor gases to avoidcreating a fire
or explosionand/or causing damage
to unit.
Loading ...
Loading ...
Loading ...